dhcp on router

[csc]

Hello,

I have a Linksys WRT54G router and when I turn off DHCP on the router I cannot get on internet.
How do I connect to internet and use the DHCP of my AMAHI server?

[bigfoot65]

Recommend you check the user manual for your router. There may be some settings you need to specifically configure.

Also, when you turned off the DHCP, did you release/renew the DHCP lease on your client? That must be done so it gets it from the HDA.

[csc]

I did ipconfig /release and /renew on the windows client.

My IP on the server is 192.168.2.1 (gateway) and when I did the ipconfig /release and /renew my IP was still 192.168.1.100 on the client.

I use wireless connection and I got a yellow triangle with a ! in it. This means I don't get the right IP configuration of the server.

[bigfoot65]

Does the gateway match your routers? It should be one and the same. Also, recommend you try the network troubleshooter. It might give some clue as to the problem.

http://wiki.amahi.org/index.php/Network_troubleshooting

[csc]

No the gateway doesn't match the routers.

THX for the support