Amahi6/f16/network

[stern88]

Hi!

Unfortunatly I dont get a internet-connection out of Fedora 16 (vbox) and Amahi 6...

My persistant-rules:

Code: Select all

# This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x8086:0x100e (e1000) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:64:03:41", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

dmesg:

Code: Select all

[ 0.007715] Initializing cgroup subsys net_cls [ 1.439750] audit: initializing netlink socket (disabled) [ 1.541871] SELinux: Registering netfilter hooks [ 2.026899] Initializing XFRM netlink socket [ 2.033796] Initializing network drop monitor service [ 6.621969] SELinux: Unregistering netfilter hooks [ 23.040266] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 23.962679] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:64:03:41 [ 23.962691] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection [ 35.000067] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 35.002341] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.002423] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 45.354081] eth0: no IPv6 routers present

hosts

Code: Select all

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

ifconfig

Code: Select all

eth0 Link encap:Ethernet Hardware Adresse 08:00:27:64:03:41 inet Adresse:10.0.2.15 Bcast:10.0.2.255 Maske:255.255.255.0 inet6 Adresse: fe80::a00:27ff:fe64:341/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:310 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:682 (682.0 b) TX bytes:16888 (16.4 KiB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1804 errors:0 dropped:0 overruns:0 frame:0 TX packets:1804 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:655865 (640.4 KiB) TX bytes:655865 (640.4 KiB)

ls from my networkscripts:

Code: Select all

ifcfg-default via 10.0.2.1 dev eth0 ifcfg-eth0 ifcfg-lo ifcfg-p2p1.org ifdown ifdown-bnep ifdown-eth ifdown-ippp ifdown-ipv6 ifdown-isdn ifdown-post ifdown-ppp ifdown-routes ifdown-sit ifdown-tunnel ifup ifup-aliases ifup-bnep ifup-eth ifup-ippp ifup-ipv6 ifup-ipx ifup-isdn ifup-plip ifup-plusb ifup-post ifup-ppp ifup-routes ifup-sit ifup-tunnel ifup-wireless init.ipv6-global net.hotplug network-functions network-functions-ipv6

lsmod

Code: Select all

Module Size Used by usb_storage 36551 1 uas 6207 0 lp 6933 0 fuse 53291 2 lockd 59180 0 cifs 223806 0 fscache 37659 1 cifs ip6t_REJECT 3395 2 nf_conntrack_ipv6 6429 2 nf_defrag_ipv6 7174 1 nf_conntrack_ipv6 xt_state 942 2 nf_conntrack 56162 2 nf_conntrack_ipv6,xt_state ip6table_filter 1215 1 ip6_tables 9828 1 ip6table_filter snd_intel8x0 23378 2 snd_ac97_codec 91152 1 snd_intel8x0 ac97_bus 922 1 snd_ac97_codec joydev 7179 0 snd_seq 43428 0 ppdev 6176 0 snd_seq_device 5033 1 snd_seq parport_pc 16772 0 snd_pcm 63679 2 snd_intel8x0,snd_ac97_codec e1000 113907 0 parport 26550 3 lp,ppdev,parport_pc snd_timer 15209 2 snd_seq,snd_pcm snd 48367 10 snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer soundcore 5027 1 snd i2c_piix4 9254 0 i2c_core 21564 1 i2c_piix4 snd_page_alloc 6095 2 snd_intel8x0,snd_pcm microcode 11041 0 uinput 5397 0 sunrpc 169682 2 lockd

lspci (I use Oracle VirtualBox)

Code: Select all

00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] Kernel driver in use: e1000 00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] Kernel driver in use: e1000

resolve.conf

Code: Select all

search home.com (?!) nameserver 10.0.2.15

route -n

Code: Select all

Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.1 0.0.0.0 UG 0 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0

uname -a

Code: Select all

Linux hda.[b]home.lan[/b] 3.1.0-7.[b]fc16.i686[/b].PAE #1 SMP Tue Nov 1 20:53:45 UTC 2011 i686 i686 i386 GNU/Linux

any idea?

[bigfoot65]

Are you using NAT or Bridged for your network mode? I used Bridged and it works. If I use NAT, it will not.

[stern88]

If I use NAT, it will not.

NAT, as usual. It works with F14, why are there problems with F16?

[bigfoot65]

Not sure if its the change in how devices are identified in Fedora 16 that causes problems or not. In Fedora 14, I had to follow the wiki (Altering the VM network config) to get network working using NAT.

http://wiki.amahi.org/index.php/Amahi_on_VirtualBox

For Fedora 16, I just set adapter 1 to bridged and it all seems to work fine. I don't know if my case is specific to VirtualBox, but the wiki guidance would not work with Fedora 16 for me.

[stern88]

some more strange problems

Code: Select all

[root@f16hda ~]# ​rpm -Uvh http://f16.amahi.org/noarch/hda-release-1.0-1.noarch.rpm​ bash: ​rpm: command not found...

Code: Select all

[root@f16hda ~]# yum install rpm Geladene Plugins: langpacks, presto, refresh-packagekit rpmfusion-free | 2.7 kB 00:00 rpmfusion-free/primary_db | 312 kB 00:00 rpmfusion-free-updates | 3.3 kB 00:00 rpmfusion-free-updates/primary_db | 91 kB 00:00 rpmfusion-free-updates/group | 11 kB 00:00 rpmfusion-nonfree | 2.7 kB 00:00 rpmfusion-nonfree/primary_db | 106 kB 00:00 rpmfusion-nonfree-updates | 3.3 kB 00:00 rpmfusion-nonfree-updates/primary_db | 34 kB 00:00 rpmfusion-nonfree-updates/group | 4.8 kB 00:00 Einrichten des Installationsprozess Paket rpm-4.9.1.2-1.fc16.i686 ist bereits in der neusten Version installiert. Nichts zu tun (Is already installed...)

Code: Select all

[root@f16hda ~]# locate rpm | grep bin locate: kann stat () `/var/lib/mlocate/mlocate.db' nicht durchführen: Datei oder Verzeichnis nicht gefunden

Code: Select all

[root@f16hda ~]# yum reinstall rpm Geladene Plugins: langpacks, presto, refresh-packagekit Einrichten des Neuinstallationsprozess Löse Abhängigkeiten auf --> Führe Transaktionsprüfung aus ---> Paket rpm.i686 0:4.9.1.2-1.fc16 markiert, um reinstalliert zu werden --> Abhängigkeitsauflösung beendet Abhängigkeiten aufgelöst ================================================================================ Paket Arch Version Repository Größe ================================================================================ Neuinstallieren: rpm i686 4.9.1.2-1.fc16 fedora 987 k Vorgangsübersicht ================================================================================ Reinstall 1 Package Gesamte Downloadgröße: 987 k Installationsgröße: 987 k Ist dies in Ordnung? [j/N] :j Lade Pakete herunter: rpm-4.9.1.2-1.fc16.i686.rpm | 987 kB 00:01 Running Transaction Check Führe Verarbeitungstest durch Verarbeitungstest erfolgreich Führe Verarbeitung durch Installieren : rpm-4.9.1.2-1.fc16.i686 1/1 Installiert: rpm.i686 0:4.9.1.2-1.fc16 Komplett! [root@f16hda ~]# ​rpm -Uvh http://f16.amahi.org/noarch/hda-release-1.0-1.noarch.rpm​ bash: ​rpm: command not found...

Code: Select all

[root@f16hda ~]# ​locate rpm | grep bin locate: kann stat () `/var/lib/mlocate/mlocate.db' nicht durchführen: Datei oder Verzeichnis nicht gefunden [root@f16hda ~]# yum install locate Geladene Plugins: langpacks, presto, refresh-packagekit Einrichten des Installationsprozess Kein Paket locate verfügbar. Fehler: Nichts zu tun [root@f16hda ~]#

... any idea?

[stern88]

can anybody explain to me Fedora?

Code: Select all

[administrator@f16hda ~]$ echo $USER administrator

so far no problem

Code: Select all

[administrator@f16hda ~]$ su root Passwort: [root@f16hda administrator]# cd [root@f16hda ~]# echo $USER administrator [root@f16hda ~]# exit

???

Code: Select all

[administrator@f16hda ~]$ su - Passwort: [root@f16hda ~]# echo $USER root [root@f16hda ~]#

[bigfoot65]

If you are using guidance from the wiki, be careful about copy and pasting. Sometimes there are special hidden characters pulled in.

I find it best to copy from the wiki into like NotePad ++ or a text editor so I can ensure if there are any present, I remove them before pasting in the terminal.

That is what most likely is the issue with the "rpm" command. Also, not sure if you saw the latest on F16 in the wiki but that is no longer needed. Recommend using the F16 repo on install now.

[stern88]

Hey bigfoot!

Thank you for your help! Another question:

Code: Select all

[root@f16hda ~]# ifconfig lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:6020 (5.8 KiB) TX bytes:6020 (5.8 KiB) [size=150]p2p1[/size] Link encap:Ethernet Hardware Adresse 08:00:27:C7:B4:30 inet Adresse:172.31.2.101 Bcast:172.31.2.255 Maske:255.255.255.0 inet6 Adresse: fe80::a00:27ff:fec7:b430/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:710 errors:0 dropped:0 overruns:0 frame:0 TX packets:351 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:93998 (91.7 KiB) TX bytes:43447 (42.4 KiB)

How can I change the name p2p1 to eth0?

Code: Select all

[root@f16hda network-scripts]# ls -l insgesamt 204 -rwxr-xr-x. 1 root root 91 13. Dez 22:02 ifcfg-eth0 -rw-r--r--. 1 root root 254 12. Okt 22:48 ifcfg-lo -rw-r--r--. 1 root root 91 13. Dez 22:01 ifcfg-p2p1.org lrwxrwxrwx. 1 root root 20 13. Dez 21:19 ifdown -> ../../../sbin/ifdown -rwxr-xr-x. 1 root root 627 12. Okt 22:48 ifdown-bnep -rwxr-xr-x. 1 root root 5579 12. Okt 22:48 ifdown-eth -rwxr-xr-x. 1 root root 781 12. Okt 22:48 ifdown-ippp -rwxr-xr-x. 1 root root 4141 12. Okt 22:48 ifdown-ipv6 lrwxrwxrwx. 1 root root 11 13. Dez 21:19 ifdown-isdn -> ifdown-ippp -rwxr-xr-x. 1 root root 1481 12. Okt 22:48 ifdown-post -rwxr-xr-x. 1 root root 1068 12. Okt 22:48 ifdown-ppp -rwxr-xr-x. 1 root root 835 12. Okt 22:48 ifdown-routes -rwxr-xr-x. 1 root root 1349 12. Okt 22:48 ifdown-sit -rwxr-xr-x. 1 root root 1434 12. Okt 22:48 ifdown-tunnel lrwxrwxrwx. 1 root root 18 13. Dez 21:19 ifup -> ../../../sbin/ifup -rwxr-xr-x. 1 root root 13533 12. Okt 22:48 ifup-aliases -rwxr-xr-x. 1 root root 859 12. Okt 22:48 ifup-bnep -rwxr-xr-x. 1 root root 10948 12. Okt 22:48 ifup-eth -rwxr-xr-x. 1 root root 11987 12. Okt 22:48 ifup-ippp -rwxr-xr-x. 1 root root 10348 12. Okt 22:48 ifup-ipv6 -rwxr-xr-x. 1 root root 804 12. Okt 22:48 ifup-ipx lrwxrwxrwx. 1 root root 9 13. Dez 21:19 ifup-isdn -> ifup-ippp -rwxr-xr-x. 1 root root 727 12. Okt 22:48 ifup-plip -rwxr-xr-x. 1 root root 954 12. Okt 22:48 ifup-plusb -rwxr-xr-x. 1 root root 2364 12. Okt 22:48 ifup-post -rwxr-xr-x. 1 root root 4154 12. Okt 22:48 ifup-ppp -rwxr-xr-x. 1 root root 1925 12. Okt 22:48 ifup-routes -rwxr-xr-x. 1 root root 3469 12. Okt 22:48 ifup-sit -rwxr-xr-x. 1 root root 2488 12. Okt 22:48 ifup-tunnel -rwxr-xr-x. 1 root root 3770 12. Okt 22:48 ifup-wireless -rwxr-xr-x. 1 root root 4623 12. Okt 22:48 init.ipv6-global -rwxr-xr-x. 1 root root 1187 12. Okt 22:48 net.hotplug -rw-r--r--. 1 root root 11719 12. Okt 22:48 network-functions -rw-r--r--. 1 root root 26134 12. Okt 22:48 network-functions-ipv6 [root@f16hda network-scripts]#

[bigfoot65]

As far as I know, you cannot change it. Doing so will break the network. Amahi F16 Alpha is designed to now pick the correct device, not just eth0. It should pick up p2p1.

[stern88]

As far as I know, you cannot change it. Doing so will break the network. Amahi F16 Alpha is designed to now pick the correct device, not just eth0. It should pick up p2p1.

Really? Also in case I remove the package "biosdevname"? However, I will keep the package and I will see I it works