Installation worked fine, but every time it boots is tells me it needs to reboot to complete the installation.
I'm going in circles - help?
Michael
SOLVED: Express install 5.4 - reboot loop
Re: Express install 5.4 - reboot loop
This is definitely a bug. If you could file one it would be best.
Now ... I assume it does not ask for the install code or reconfigure Amahi?
It simply says it need to reboot again?
You can comment the ConfigureAmahi line in /etc/rd.local file
(if you know how to do that).
Otherwise I *think* it's safe to ignore this (assuming you don't need the console).
http://bugs.amahi.org -
1) Login using the same username you use on amahi.org - 2) Choose the project (installer in this case) - 3) Choose "New Issue" -> bug.
Now ... I assume it does not ask for the install code or reconfigure Amahi?
It simply says it need to reboot again?
You can comment the ConfigureAmahi line in /etc/rd.local file
(if you know how to do that).
Otherwise I *think* it's safe to ignore this (assuming you don't need the console).
http://bugs.amahi.org -
1) Login using the same username you use on amahi.org - 2) Choose the project (installer in this case) - 3) Choose "New Issue" -> bug.
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Re: Express install 5.4 - reboot loop
Woops... express worked fine after I used the CORRECT ip address -- used the default, not my modified 192.168... range.
works great! Up and running and configuring!
thank you,
Michael
works great! Up and running and configuring!
thank you,
Michael
Re: SOLVED: Express install 5.4 - reboot loop
good
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Re: SOLVED: Express install 5.4 - reboot loop
Hi, I'm having the same problem.
Can't seem to log in to the system at all..
Tried the default ip, tried my configured IP, And checked the ip with root login and tried that one.
Any suggestions are really welcome.
Can't seem to log in to the system at all..
Tried the default ip, tried my configured IP, And checked the ip with root login and tried that one.
Any suggestions are really welcome.
Re: SOLVED: Express install 5.4 - reboot loop
Unfortunately I too am having the same problem, I did try manually editing my IP to the one I entered on the Amahi config site, but to no avail. I have also commented out the AmahiConfigure as per the earlier suggestion but the server is not showing on the network, nor is there an http server running on it as far as I can tell.
Any help on getting this working would be appreciated as I like the look of it...
Cheers,
Rupert.
Any help on getting this working would be appreciated as I like the look of it...
Cheers,
Rupert.
Re: SOLVED: Express install 5.4 - reboot loop
Alright, here is what I had to do to resolve this issue:
select debug - configure your network interface correctly ( I used static ) / also make sure your dns are configured
exit the system-config-network
run
(yay !)
(case important)
you get a waiting screen for a while, then you get back to the reboot needed / debug screen
select reboot
enjoy !
select debug
Code: Select all
system-config-network
exit the system-config-network
run
Code: Select all
/etc/init.d/network restart
Code: Select all
ping google.com
Code: Select all
ConfigAmahi
you get a waiting screen for a while, then you get back to the reboot needed / debug screen
select reboot
enjoy !
Re: SOLVED: Express install 5.4 - reboot loop
thanks @realbuz!
also, if the people having this problem could indicate what is their networking situation ... one ethernet, two or more, etc., that would be useful to track this issue down.
also, if the people having this problem could indicate what is their networking situation ... one ethernet, two or more, etc., that would be useful to track this issue down.
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Re: SOLVED: Express install 5.4 - reboot loop
fixed, see the wiki
LANTEA: Amahi 7 (vm), HP Proliant Microserver, 8GB RAM, 2x 1TB HDD, 1GB eth
-
- Posts: 20
- Joined: Fri Jun 26, 2009 6:27 pm
Re: SOLVED: Express install 5.4 - reboot loop
Forgive what is probably a really idiotic question, but I'm having problems installing the Express CD and I don't understand how you "select debug" as suggested in an earlier post and on the wiki.
When I boot to the Express CD, I see two options: "Erase everything, install Amahi headless" and "Expert install for Amahi headless - Graphic installer"
I'm sure I'm missing something basic but I don't understand how to "select debug" so I can enable my network card and proceed with the installation. (I'm in the "invalid code" loop because my ethernet card isn't enabled.)
Thanks.
When I boot to the Express CD, I see two options: "Erase everything, install Amahi headless" and "Expert install for Amahi headless - Graphic installer"
I'm sure I'm missing something basic but I don't understand how to "select debug" so I can enable my network card and proceed with the installation. (I'm in the "invalid code" loop because my ethernet card isn't enabled.)
Thanks.
Who is online
Users browsing this forum: No registered users and 48 guests