My new Amahi installation consists of 3 disks. One 500gb (Amahi installed here)... and 2 2TB drives.
The disk/partitions tab only shows me partitions on dev/sda. How can I view sdb and sdc?
CLOSED: Can't see partitions on all my disks
Re: Can't see partitions on all my disks
You have to mount them manually in Linux.
See the add additional disk drives guidance in the wiki.
Also, if you search the forums you’ll likely find this question has been asked by others.
See the add additional disk drives guidance in the wiki.
Also, if you search the forums you’ll likely find this question has been asked by others.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: Can't see partitions on all my disks
OK... I believe I followed the instructions carefully, but now my server won't boot. Says I'm in emergency mode... can't open console, the root account is locked.. etc. press enter to continue. Pressing enter returns the same error. Please advise.
Re: Can't see partitions on all my disks
You must have done something wrong or it would have booted.
What you are trying to do is for advanced users. Best advice I can offer is reinstall Fedora and Amahi, with only a single drive connected as the instructions state.
Then once you get everything working, add one drive manually. Ensure it mounts properly before rebooting.
Unfortunately, you are at a point now that we cannot assist. It would require paid support as it's quite complicated to get things back in order.
What you are trying to do is for advanced users. Best advice I can offer is reinstall Fedora and Amahi, with only a single drive connected as the instructions state.
Then once you get everything working, add one drive manually. Ensure it mounts properly before rebooting.
Unfortunately, you are at a point now that we cannot assist. It would require paid support as it's quite complicated to get things back in order.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: Can't see partitions on all my disks
OK, I'll start over. BTW I used "vi" to edit the fstab. Is there a better editor?
Re: Can't see partitions on all my disks
Hope it goes better this time.
Many like to use nano.
You have to install it:
Many like to use nano.
You have to install it:
Code: Select all
sudo dnf install nano
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: Can't see partitions on all my disks
Ah... thanks. I tried nano 1st and wondered why the command wasn't recognized.
Question... On the install I've been "unchecking" the 2 2tb drives. If I leave them all checked, will it add all 3 disks and mount them all... If so, where does the os get installed?
Question... On the install I've been "unchecking" the 2 2tb drives. If I leave them all checked, will it add all 3 disks and mount them all... If so, where does the os get installed?
Re: Can't see partitions on all my disks
Recommend you do not connect those drives unless you know what you are doing.
This will minimize any issues you might have with the rest of the installation.
One user lost data by leaving the drives connected. Now he's scrambling to get it back.
This will minimize any issues you might have with the rest of the installation.
One user lost data by leaving the drives connected. Now he's scrambling to get it back.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: Can't see partitions on all my disks
OK, but the drives are new (no data). So what I'm gathering is one should only run the installation with a single drive.... and then add your storage drives via the "add a 2nd hard drive" wiki?
Re: Can't see partitions on all my disks
Yes that is correct.
Amahi was designed and tested with only a single disk drive and network card.
Amahi was designed and tested with only a single disk drive and network card.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Who is online
Users browsing this forum: No registered users and 66 guests