CLOSED: Amahi Energy Saver

amahivirtual
Posts: 19
Joined: Sun Jun 05, 2011 1:18 pm

Re: Amahi Energy Saver

Postby amahivirtual » Thu Jun 09, 2011 4:30 am

Dear jayrock,

thanks a lot for this clarifications an AES calendaring :) I will check it out on my home server the next days.

Jayrock, I would like to ask whether I could contribute some information on MacOSX Wake on LAN (WOL)-Clients and perhaps on my questions concerning the AES calendar implementation on http://wiki.amahi.org/index.php/Amahi_Energy_Saver or should I send the contributions to you directly?

Regards,
amahivirtual
----------------------------------------------------------------------------------------------

AMD Athlon II X2 250e, Asus M4A78LT-M, 2GB DDR3 PC3-10600 ECC, 320 GB HDD for OS (2,5 Inch), 2x 1 TB WD10EADS HDDs in a RAID 1 Array (3,5 inch), be quiet! Pure Power L7, 300W. Fedora 14 with Amahi 6.x.

User avatar
jayrock
Posts: 223
Joined: Thu Dec 02, 2010 12:55 am

Re: Amahi Energy Saver

Postby jayrock » Thu Jun 09, 2011 5:56 am

Hi amahivirtual,

sure, contributions are always appreciated! You can send the input to me or if you prefer edit the wiki page directly.

Cheers,
jayrock

paurey
Posts: 25
Joined: Mon Apr 18, 2011 12:50 pm

Re: Amahi Energy Saver

Postby paurey » Fri Jun 10, 2011 10:30 pm

Hi paurey,

how do you want to wake your HDA? Please check that your board actually supports that kind of wakeup. Unfortunately, some boards do not support timer based wake-up and/or WOL.

Referring to WOL check this wiki page: http://wiki.amahi.org/index.php/Enabling_WOL

/jayrock
Hello

Thanks. To begin with, I want to wake my HDA no matter how, because right now I can't.
My board supports WOL and ACPI 1.0b
http://www.gigabyte.com/products/produc ... id=3549#sp
It even reacts to a WOL package when in S3 state and starts consuming power, however Amahi-Fedora is dead and does not react. Also happens with S1.

Thanks for giving me any clue.

User avatar
jayrock
Posts: 223
Joined: Thu Dec 02, 2010 12:55 am

Re: Amahi Energy Saver

Postby jayrock » Sat Jun 11, 2011 2:20 am

Hello paurey,

does it work with S4?

Did you follow this guide: http://wiki.amahi.org/index.php/Amahi_E ... utdownType

To me the sounds like a OS/Mainboard compatability issue. I guess you'll have more success with Gigabyte and/or Fedora support forums.

/jayrock

amahivirtual
Posts: 19
Joined: Sun Jun 05, 2011 1:18 pm

Re: Amahi Energy Saver

Postby amahivirtual » Sun Jun 12, 2011 3:41 pm

Dear jayrock,
I just installed the LogAnalyzer App http://www.amahi.org/apps/loganalyzer and I would like to observe there the aes.log.* of my HDA. Perhaps you may have some suggestions on how to get aes.log visualized by the LogAnalyzer? I know there is a way on adding log file sources (Admin Center >> Sources) , but I do not have a clue on getting it work.

Regards,
amahivirtual

User avatar
jayrock
Posts: 223
Joined: Thu Dec 02, 2010 12:55 am

Re: Amahi Energy Saver

Postby jayrock » Mon Jun 13, 2011 12:31 am

Hello amahivirtual,

please post this question for LogAnalyzer in the respective forums.

Cheers,
jayrock

amahivirtual
Posts: 19
Joined: Sun Jun 05, 2011 1:18 pm

Re: Amahi Energy Saver

Postby amahivirtual » Mon Jun 13, 2011 1:34 am

Hi jayrock,
Sorry for posting on the wrong side. I followed your suggestion and posted my question regarding LogAnalyzer to the Applications/General board: http://forums.amahi.org/viewtopic.php?f=13&t=3057 .
Regards,
amahivirtual

User avatar
jayrock
Posts: 223
Joined: Thu Dec 02, 2010 12:55 am

Re: Amahi Energy Saver

Postby jayrock » Mon Jun 13, 2011 11:55 am

No worries. Just want to make sure that other people can find it. If I find the time I will have a look at Log Analyzer.

/jayrock

amahivirtual
Posts: 19
Joined: Sun Jun 05, 2011 1:18 pm

Re: Amahi Energy Saver

Postby amahivirtual » Mon Jun 13, 2011 1:01 pm

Hi jayrock,
I git the hint in the applications board. I just added this to the AES wiki page on chapter 7 "Logs and LogAnalyzer". You may have a look at it and correct it if necessary.
Thanks for the suggestions with the right board to post on.
Regards,
amahivirtual

paurey
Posts: 25
Joined: Mon Apr 18, 2011 12:50 pm

Re: Amahi Energy Saver

Postby paurey » Mon Jun 20, 2011 8:11 am

Hello paurey,

does it work with S4?

Did you follow this guide: http://wiki.amahi.org/index.php/Amahi_E ... utdownType

To me the sounds like a OS/Mainboard compatability issue. I guess you'll have more success with Gigabyte and/or Fedora support forums.

/jayrock
Well with S4 it seems to be working, although it takes a bit too long to wake it up with WOL.
I Haven't tried it intensively yet. But thanks for the hints.

Best

Who is online

Users browsing this forum: No registered users and 11 guests