CLOSED: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

merxone
Posts: 4
Joined: Fri Feb 19, 2021 1:30 pm

CLOSED: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby merxone » Fri Feb 19, 2021 1:59 pm

hello i have a problem with the install when i give the code

Code: Select all

rpm -Uvh http://f27.amahi.org/noarch/hda-release-11.0.0-1.noarch.rpm dnf -y install hda-ctl hda-install -i YOUR-INSTALL-CODE
i became the error the installer cannot access the network to retrieve your HDAs settings.
Please double check that the machine has network/internet access.
Try 'dhclient eth0' (as root) to configure your network interface.
when i see the ifconfig is only one network card online and the name is eth0

Code: Select all

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.xxx.xxx netmask 255.255.255.0 broadcast 192.168.XXX.XXXX inet6 xxxx:xxx:xxxx:6xx:8xx:bdX:fXXXe:fXX2 prefixlen 128 scopeid 0x0<global> inet6 2XXX:9XX:2XX:6XX:39XX:XX2:5XXX:fXXXf prefixlen 64 scopeid 0x0<global> inet6 fXX::8XX:bXXX7:XXX:fXXX prefixlen 64 scopeid 0x20<link> inet6 XXX::cXXa:XXXX:bcXX:XXX6 prefixlen 64 scopeid 0x0<global> ether XX:XX:XX:XX:XX:XX txqueuelen 1000 (Ethernet) RX packets 37895 bytes 3164582 (3.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30376 bytes 9129249 (8.7 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xf0600000-f0620000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Lokale Schleife) RX packets 2300 bytes 3390684 (3.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2300 bytes 3390684 (3.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

thenks for helps

User avatar
bigfoot65
Project Manager
Posts: 11841
Joined: Mon May 25, 2009 4:31 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby bigfoot65 » Fri Feb 19, 2021 3:55 pm

Each line must be entered individually.

Try them one at a time and report back the result.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

merxone
Posts: 4
Joined: Fri Feb 19, 2021 1:30 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby merxone » Fri Feb 19, 2021 4:01 pm

i have this make first step was rpm -Uvh http://f27.amahi.org/noarch/hda-release ... noarch.rpm
the secend step was dnf -y install hda-ctl and the last was hda-install -i MY-INSTALL-CODE
and the end of this was

error the installer cannot access the network to retrieve your HDAs settings.
Please double check that the machine has network/internet access.
Try 'dhclient eth0' (as root) to configure your network interface.

User avatar
bigfoot65
Project Manager
Posts: 11841
Joined: Mon May 25, 2009 4:31 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby bigfoot65 » Fri Feb 19, 2021 4:04 pm

Ok. Does your network settings match what you entered for theHDA profile.

Also, do you have a firewall or something in your network that might be causing the issue?
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

merxone
Posts: 4
Joined: Fri Feb 19, 2021 1:30 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby merxone » Fri Feb 19, 2021 4:10 pm

no the firewall was off

User avatar
bigfoot65
Project Manager
Posts: 11841
Joined: Mon May 25, 2009 4:31 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby bigfoot65 » Fri Feb 19, 2021 5:08 pm

Did you check your HDA profile on amahi.org?

The settings must match your network. Install will not work if they don’t.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

User avatar
bigfoot65
Project Manager
Posts: 11841
Joined: Mon May 25, 2009 4:31 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby bigfoot65 » Sat Feb 20, 2021 8:47 am

There was an issue with the Amahi site, but it is now corrected.

Recommend you try the installation again.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

merxone
Posts: 4
Joined: Fri Feb 19, 2021 1:30 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby merxone » Sun Feb 21, 2021 10:58 am

its works

User avatar
bigfoot65
Project Manager
Posts: 11841
Joined: Mon May 25, 2009 4:31 pm

Re: ERROR: the installer cannot access the network to retrieve your HDAs settings.-

Postby bigfoot65 » Sun Feb 21, 2021 11:16 am

Thanks for the update.

Will mark this thread as resolved.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

Who is online

Users browsing this forum: No registered users and 5 guests