CLOSED: Amahi 10 - No hda-ctl package available

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

CLOSED: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 9:43 am

Hello,

I'm installing the Fedora 25/Amahi 10 per the installation instructions. When I get to the: dnf -y install hda-ctl command line it installs Fedora 25 - x86_64 (50MB) then installs Fedora 25 - x86_64 - Updates (24MB). the next line reads: Last Metadata expiration check: 0:00:20 ago on Todays date and time. Finally i get this line:

No package hda-ctl available.
Error: Unable to find a match.

Am i typing something incorrectly? How do i progress from here? i'm already registered and have my install code ready!

Thanks,
Nash

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: Amahi 10 - No hda-ctl package available

Postby bigfoot65 » Thu Feb 01, 2018 10:48 am

Try the following before executing that command:

Code: Select all

sudo dnf clean all
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

Re: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 12:41 pm

Thanks for the quick response!

But, I get the same error after running:
sudo dnf clean all

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: Amahi 10 - No hda-ctl package available

Postby bigfoot65 » Thu Feb 01, 2018 12:46 pm

What version of Fedora did you install?

Are you getting network connectivity?

I presume you followed guidance at http://docs.amahi.org.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

Re: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 12:51 pm

Yes i have been following installation guide you referenced. I've installed Fedora 25 and yes i believe i am getting network connectivity in the Fedora set up. i have 2 network ports on this motherboard so i manually assigned the ip address. May this be causing the issue?

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

Re: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 12:58 pm

i do have network connection. i was able to ping successfully.

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: Amahi 10 - No hda-ctl package available

Postby bigfoot65 » Thu Feb 01, 2018 1:14 pm

i have 2 network ports on this motherboard so i manually assigned the ip address. May this be causing the issue?
Yes, that is the issue. The system requirements are specific. ONLY one network interface can be enabled when installing Amahi.

You will have to start over with the Fedora 25 install after disabling one network card.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

Re: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 1:23 pm

Just to note, i have successfully installed amahi on Fedora 14 on this pc prior to upgrading today. i assume i will need to disable my nvidia ethernet controller in the bios. Thanks for the input i will give it another try.

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: Amahi 10 - No hda-ctl package available

Postby bigfoot65 » Thu Feb 01, 2018 2:35 pm

Let us know how it goes.

Will mark this thread as closed.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

nashbar50
Posts: 6
Joined: Thu Feb 01, 2018 9:19 am

Re: Amahi 10 - No hda-ctl package available

Postby nashbar50 » Thu Feb 01, 2018 2:40 pm

That did the trick. You can close this thread. Thanks!

Who is online

Users browsing this forum: No registered users and 21 guests