Upgrading Amahi 6 to Amahi 9 - Preserving files?

Ianb
Posts: 9
Joined: Sun Nov 20, 2011 2:16 pm

Upgrading Amahi 6 to Amahi 9 - Preserving files?

Postby Ianb » Tue May 03, 2016 5:39 am

Hello

My old Amahi 6 installation has finally died. It has been poorly for a while, but at the weekend it failed completely. I know the installation was not ideal - the OS was installed to a USB flash drive and that may be where the issue that caused the failure existed.

Anyway, whilst I am rebuilding the machine I'm going to carry out a few upgrades - adding a 60Gb SSD for the OS and a couple of 3Tb HDD's as well as the two 2Tb's installed in the original build.

The question is "Can I retain the data / file structure on the existing 2Tb drives"? These were originally configured as a RAID 1 pair, but I think the RAID fuctionality in Fedora 14 may have failed a while ago. I have a backup from a couple of months ago on a USB HDD, but if I can preserve what is existing on the most up to date of the current drives it would be useful.

The new install will use greyhole, not RAID.

Any advice appreciated.

Who is online

Users browsing this forum: No registered users and 15 guests