Page 1 of 1
adding 2nd harddrive
Posted: Tue Jul 07, 2015 6:18 pm
by Randy14
i did the ls-1 /dev//by-=id/ > after.txt
cat after,txt
shows my new hard drives but
ata hitachi part1
part 2
part 3
ata wdc part 1
part 2
part 3
this cant be right
????????
Re: adding 2nd harddrive
Posted: Wed Jul 08, 2015 4:58 pm
by bigfoot65
That does seem like odd results.
How many disks do you have installed besides the OS?
Re: adding 2nd harddrive
Posted: Wed Jul 08, 2015 7:18 pm
by Randy14
one
Re: adding 2nd harddrive
Posted: Thu Jul 09, 2015 1:53 pm
by bigfoot65
Do you have all the dependencies required by the
adding a second drive to your HDA installed?
I have not see this sort of behavior in the past. Might be worth trying to find the UUID for the drive and doing the
manual disk mount option in the wiki.
Re: adding 2nd harddrive
Posted: Sun Jul 12, 2015 7:55 am
by Randy14
this is what I have installed 1TB hard drive
disk stats shows
/dev/sda1 /boot 190mb
/dev/sda3 /913gb
under partition
none /var/spool/greyhole/mem 4
free 4mb
does this look normal
thanks
Re: adding 2nd harddrive
Posted: Sun Jul 12, 2015 8:22 am
by bigfoot65
Yes that looks normal.
Re: adding 2nd harddrive
Posted: Sun Jul 12, 2015 10:11 am
by Randy14
well adding new hard drive
did before ls-1 cat txt
did all this comes up
ata-hitachi hde72101sla330-ms-part1
part2
part3
Re: adding 2nd harddrive
Posted: Sun Jul 12, 2015 10:16 am
by bigfoot65
Ok, so what are you asking?
Typically the OS hard drive will be assigned as /dev/sda and any others after will be /dev/sdb, /dev/sdc, etc.
I am not sure I understand what you are asking here.