Page 1 of 1
CLOSED: Amahi and Greyhole install on an HP Proliant Gen8 Server.
Posted: Tue Jan 06, 2015 10:39 am
by gdp
AMAHI NOTES
Amahi 7 and Greyhole on a HP Proliant Gen8 MicroServer
NOTE: Text was removed by the Forums Administrator and added to the Amahi wiki. See
HDA on HP Proliant Gen8 MicroServer.
Feel free to edit if any changes are needed.
Re: Amahi and Greyhole install on an HP Proliant Gen8 Server.
Posted: Wed Jun 10, 2015 2:05 pm
by evylrat
I have a few questions regarding the install on the Gen8. Did you make any changes to the BIOS to remove the "Bios FW Bug Found" on boot? And which LAN port did you use? I've just installed using LAN1 and whilst it was picked up, the install is now reporting that the network is unreachable. Going to try LAN2. Then again I set up the Gen8 with my previous HDA running (different IP but same domain name). Will turn off the previous one during install.
Re: Amahi and Greyhole install on an HP Proliant Gen8 Server.
Posted: Sat May 14, 2016 5:45 am
by evylrat
Anyone doing an install on Gen8 by HP, you'll have to change the SATA controller to Legacy and then change boot order to Controller 2 as boot up if you intend to use the ODD port (SATA5) for a SSD or HDD. Still setting this up as I type this, but it's booting.
Re: Amahi and Greyhole install on an HP Proliant Gen8 Server.
Posted: Sat May 14, 2016 8:23 am
by bigfoot65
Could you please add this info to the
wiki page?
We would greatly appreciate it.