Page 1 of 2
cannot create static ip
Posted: Mon Jul 07, 2014 10:14 am
by paparay
when trying to create static ip i get message: is not a number
Re: cannot create static ip
Posted: Mon Jul 07, 2014 12:06 pm
by bigfoot65
Re: cannot create static ip
Posted: Mon Jul 07, 2014 2:14 pm
by paparay
obviously i have done something wrong but as far as i know i followed the directions you suggested. i do not understand "number" message.
thanks,
ray
Re: cannot create static ip
Posted: Mon Jul 07, 2014 2:40 pm
by bigfoot65
You have to be more specific. Did you correctly enter the MAC address?
Re: cannot create static ip
Posted: Tue Jul 08, 2014 7:35 am
by paparay
yes correct mac address. did network scan to double check
Re: cannot create static ip
Posted: Tue Jul 08, 2014 8:29 am
by iamhives
I just had the same problem. You just need to enter the last three digits of the address you're trying to assign as static (xyz) not the full 192.168.1.xyz
Re: cannot create static ip
Posted: Tue Jul 08, 2014 10:47 am
by paparay
wow! that worked. thanks for your help.but when select my home domain there is problem loading page.
Re: cannot create static ip
Posted: Tue Jul 08, 2014 2:38 pm
by bigfoot65
That was listed in the wiki instructions. Not sure what your other problem might be. You will need to provide more details if you need assistance.
Re: cannot create static ip
Posted: Wed Jul 09, 2014 7:28 am
by paparay
when i paste home domain in browser I get message:cannot find server at xxxxx.net. should
dhcp be enabled on router. should dhcp be enabled in settings? or any other area to troubleshoot?
thanks,
Re: cannot create static ip
Posted: Wed Jul 09, 2014 2:28 pm
by bigfoot65
Once you set the static IP address, you need to refresh the DHCP lease on your client. Are you using your router or the HDA for DHCP services?
In order to access the dashboard, you typically just enter
http://hda This will vary depending on where your client get's it's DHCP lease.