Amahi Forums

Hello
I have been running version 8 for a few months and it has been fine, so I thought I'd upgrade and do a clean install using Fedora 9

However I always trip up at the part where you select add repository and it pops up with the network settings box, I have tried various settings , firewall off, resetting router, factory restore router etc and I still can't get it. I did manage it tonight by installing Fedora normally and then following the instructions to add amahi afterwards but I couldnt get shares working despite adding accounts

I started at 12 last night gave up at 4 in the morning tried again at 4.30pm today and its now 12.45am so I need your help. Im probably doing something stupid, but what is stumping me is how I managed to install version 8 before it must have been a fluke

here are some pictures so you can see what I was seeing. Just so you know my set up, I have an adsl modem with a network cabling from it leading to a four port router, and my pc,s and amahi box where plugged into the router.

So this is what I see in my router admin page


so I start to install and the first way I tried was just to select dhcp as suggested in instructions .This is what i set up on the amahi site to get my install code


so the screen I see on the install is this
then i press next


then i get to this page and press next


I then see this


so i try again by putting these details in



I get to the bit where i add an repository again


press next and again I see this


so i try putting these details in on this page


i tried putting in 192.168.1.5 with 192.168.2.10 for the server and im stumped every time
I hope the above makes sense
Any help would be appreciated and Id love to get version 9 up and running
thanks

well despite a lot more tries couldnt get it to install via the router, so plugged the modem straight into the amahi box and got it installed that way

sorry about the belated response.

the settings in amahi.org should be 192.168.2.1 for your gateway, looks like from the first picture. so what you are putting *seems* correct.

are you up and running?

yes thanks , I just connected straight into the modem and it set up fine, I was more for trying to figure out why it wouldnt set up via my router as it had done when I installed the previous version, but not to worry .
I like the new improvements in the new version