Express install reboot loop

Post Reply
EricD
Posts: 2
Joined: Mon Jul 05, 2010 12:47 pm

Express install reboot loop

Postby EricD » Tue Jul 06, 2010 1:33 am

Anyone tried the expert express installation?
The basic express installation works perfect but since i want to use drive encryption, i have to use the expert installation procedure.
In that case the installation ends in a reboot loop (also mentioned a few topics ago).
"ConfigAmahi" does not work (ends after a fraction of a second...not normal I believe).
Any ideas? (i am not a linux expert)
Last edited by EricD on Tue Jul 06, 2010 11:45 pm, edited 1 time in total.
Top
User avatar
moredruid
Expert
Posts: 791
Joined: Tue Jan 20, 2009 1:33 am
Location: Netherlands
Contact:
Contact moredruid

Re: Express install reboot loop

Postby moredruid » Tue Jul 06, 2010 2:16 am

check that eth0 has started (ifconfig), if not edit /etc/sysconfig/network-scripts/ifcfg-eth0; modify ONBOOT=no to ONBOOT=yes; then issue the "ifup eth0" command. the ConfigAmahi command should take longer now.
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Top
EricD
Posts: 2
Joined: Mon Jul 05, 2010 12:47 pm

Re: Express install reboot loop

Postby EricD » Tue Jul 06, 2010 11:01 am

Set "ONBOOT" to 'yes' but unfortunately no difference
Top
Post Reply

Return to “Installation”

Who is online

Users browsing this forum: No registered users and 3 guests