I am concerned about two issues that I have. I'm having issues with my network setup which is my most urgent issue and I'm also having some issues with the amahi OS drive. I know this section is for networking, but I'm not certain as to whether or not the two are comorbid.
1.Issues with my network setup.
My setup and problem are as follows:
My amahi server is acting as my router. All my machines are connected wireless to my airport extreme, except the amahi server which is wired. On my iMac and my iPad, internet is lightning fast and so is file transfer to and from the server. However, on my macbook and macbook pro, as well as a friends PC laptop, both internet and intranet speeds are painfully sluggish. Some websites do no even open, and transfering files to and from the server is extremely slow.
Only just today, the internal and external speeds on my laptops started to act strange (ie slow.)
Originally, the amahi server was not acting as a router. To try and resolve the issue, I decided to alter that and so configured my router according to the airport extreme router guide found in the installation guide on the main website. Once it was properly configured, upload and download speeds on the server sky rocketed, connection speeds both internal and external were maintained on my desktop and tablet but it did not resolve the issue with the laptops.
2. I've been getting errors from the drive that ubuntu and amahi are installed on, but not my media drive which houses the shares.
Here is the errors I get from the drive.:
Code: Select all
$ sudo smartctl -x /dev/sdbsmartctl 5.41 2011-06-09 r3365 [i686-linux-3.5.0-30-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K160
Device Model: Hitachi HTS541616J9SA00
Serial Number: SB2404SJCGS9PE
Firmware Version: SB4OC7BP
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Sat May 25 10:05:10 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 086 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 234 100 033 - 1
4 Start_Stop_Count -O--C- 096 096 000 - 7174
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 750 (0, 49)
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 053 053 000 - 20912
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 3734
191 G-Sense_Error_Rate -O-R-- 100 093 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 178
193 Load_Cycle_Count -O--C- 071 071 000 - 293277
194 Temperature_Celsius -O---- 141 100 000 - 39 (Min/Max 13/52)
196 Reallocated_Event_Count -O--CK 100 100 000 - 79
197 Current_Pending_Sector -O---K 100 100 000 - 1
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 3725 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3725 [0] occurred at disk power-on lifetime: 20506 hours (854 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 04 00 Error: IDNF at LBA = 0x04000000 = 67108864
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 d0 ff 00 00 00 00 00 00 00 00 04 00 01:12:41.300 READ DMA
00 d0 ff 00 ec 00 00 00 40 00 00 00 00 01:12:41.300 NOP [Reserved subcommand]
00 d0 ff 00 14 10 00 00 40 00 00 00 00 01:12:41.300 NOP [Reserved subcommand]
73 d0 ff 08 00 5f a7 48 43 00 00 00 00 01:12:41.300 SEEK [RET-4]
48 d0 ff 00 00 00 00 00 00 00 00 05 00 01:12:41.300 [RESERVED]
Error 3724 [3] occurred at disk power-on lifetime: 20504 hours (854 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0e 00 00 04 95 fd ba 44 00 Error: UNC 14 sectors at LBA = 0x0495fdba = 76938682
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 d8 ff 00 40 00 00 04 95 fd 88 40 00 00:03:48.300 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 48 40 00 00:03:48.300 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 08 40 00 00:03:48.300 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b0 40 00 00:03:48.300 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b8 40 00 00:03:48.200 READ DMA EXT
Error 3723 [2] occurred at disk power-on lifetime: 20488 hours (853 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0e 00 00 04 95 fd ba 44 00 Error: UNC 14 sectors at LBA = 0x0495fdba = 76938682
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 d8 ff 00 40 00 00 04 95 fd 88 40 00 00:03:29.600 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 48 40 00 00:03:29.600 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 08 40 00 00:03:29.600 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b0 40 00 00:03:29.600 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b8 40 00 00:03:29.500 READ DMA EXT
Error 3722 [1] occurred at disk power-on lifetime: 20473 hours (853 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0e 00 00 04 95 fd ba 44 00 Error: UNC 14 sectors at LBA = 0x0495fdba = 76938682
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 d8 ff 00 40 00 00 04 95 fd 88 40 00 00:04:33.600 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 48 40 00 00:04:33.600 READ DMA EXT
25 d8 ff 00 40 00 00 04 95 fd 08 40 00 00:04:33.600 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b0 40 00 00:04:33.600 READ DMA EXT
25 d8 ff 00 08 00 00 04 95 fe b8 40 00 00:04:33.600 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 17368 -
# 2 Extended offline Completed without error 00% 17367 -
# 3 Short offline Completed without error 00% 17366 -
# 4 Extended offline Completed without error 00% 17366 -
# 5 Short offline Completed without error 00% 17364 -
# 6 Short offline Aborted by host 90% 17363 -
# 7 Short offline Aborted by host 90% 17363 -
# 8 Short offline Aborted by host 90% 17361 -
# 9 Extended offline Completed without error 00% 17361 -
#10 Short offline Completed without error 00% 17359 -
#11 Short offline Completed without error 00% 16870 -
#12 Extended offline Aborted by host 90% 16870 -
#13 Short offline Completed without error 00% 16870 -
#14 Extended offline Completed without error 00% 16860 -
#15 Short offline Completed without error 00% 16859 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
