Hi,
I just upgraded my built-in nic to a 1gb nic as eth1. I read the troubleshooting wiki here:
http://wiki.amahi.org/index.php/Network_customizations
However, I am not able locate the file /etc/hdactl.conf. I am running amahi 6 with fedora 14. Any ideas?
thanks!
upgrading nic card and /etc/hdactl.conf
Re: upgrading nic card and /etc/hdactl.conf
first run "updatedb"
then run "locate hdactl.conf"
you should get the location of the file...
then run "locate hdactl.conf"
you should get the location of the file...
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Re: upgrading nic card and /etc/hdactl.conf
thanks but I ran the updatedb command and and this is the only files I can locate:
/etc/monit.d/hdactl.conf
/usr/share/hdactl/monit.d/hdactl.conf
The contents of the files don't seem to have the details.
# cat /etc/monit.d/hdactl.conf
# file automatically generated by amahi on Sat Jul 11 20:43:15 -0700 2009 - WARNING - any manual edits may be lost!
check process hdactl with pidfile /var/run/hdactl.pid
start program = "/etc/init.d/hdactl start"
stop program = "/etc/init.d/hdactl stop"
cat /usr/share/hdactl/monit.d/hdactl.conf
# file automatically generated by amahi on Sat Jul 11 20:43:15 -0700 2009 - WARNING - any manual edits may be lost!
check process hdactl with pidfile /var/run/hdactl.pid
start program = "/etc/init.d/hdactl start"
stop program = "/etc/init.d/hdactl stop"
thanks
/etc/monit.d/hdactl.conf
/usr/share/hdactl/monit.d/hdactl.conf
The contents of the files don't seem to have the details.
# cat /etc/monit.d/hdactl.conf
# file automatically generated by amahi on Sat Jul 11 20:43:15 -0700 2009 - WARNING - any manual edits may be lost!
check process hdactl with pidfile /var/run/hdactl.pid
start program = "/etc/init.d/hdactl start"
stop program = "/etc/init.d/hdactl stop"
cat /usr/share/hdactl/monit.d/hdactl.conf
# file automatically generated by amahi on Sat Jul 11 20:43:15 -0700 2009 - WARNING - any manual edits may be lost!
check process hdactl with pidfile /var/run/hdactl.pid
start program = "/etc/init.d/hdactl start"
stop program = "/etc/init.d/hdactl stop"
thanks
Re: upgrading nic card and /etc/hdactl.conf
ok after some experimenting, you just create the file if it doesn't exists and just put the following in it and save:
$DEVICE = "eth1"
thanks
$DEVICE = "eth1"
thanks
Who is online
Users browsing this forum: No registered users and 26 guests