Amahi Forums

Posted: **Mon Apr 25, 2011 8:57 am**

[mark@localhost ~]$ nslookup hda
Server: 192.168.1.10
Address: 192.168.1.10#53

Name: hda.bear975home.com
Address: 192.168.1.10

[mark@localhost ~]$ ping -c 1 router
ping: unknown host router
[mark@localhost ~]$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth1
[mark@localhost ~]$ arp -a
h254.bear975home.com (192.168.1.254) at 00:04:ed:23:e2:de [ether] on eth1
[mark@localhost ~]$ traceroute -q 1 -m 5 router
router: No address associated with hostname
Cannot handle "host" cmdline arg `router' on position 1 (argc 5)
[mark@localhost ~]$

Posted: **Mon Apr 25, 2011 4:06 pm**

Do you have 2 ethernet ports? (I see both eth0 and eth1).

If so, that is going to complicate things. Can you set up your system with just one?

What is the ip address of your router?

Amahi Forums

Using the Network Troubleshooter, I failed step 5

Using the Network Troubleshooter, I failed step 5

Re: Using the Network Troubleshooter, I failed step 5