DHA can't reach the router

[davehalleng]

Using the Network Troubleshooter, I failed step 5 - Router is reachable?. Here's a paste to help troubleshoot:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
[root@Cthulu cerebrus]# arp -a
h001.DaveNSara.com (192.168.1.1) at <incomplete> on eth0
h001.DaveNSara.com (192.168.1.1) at 00:18:f8:bf:3a:c9 [ether] on eth1
[root@Cthulu cerebrus]# traceroute -q 1 -m 5 router
traceroute to router (192.168.1.1), 5 hops max, 60 byte packets
1 hda.DaveNSara.com (192.168.1.10) 3000.545 ms !H

[moredruid]

have you tried to restart the hda?
can you ping the router not by hostname but by IP address?

[cale250]

It appears that you have two NICs on board. We only officially support one, eth0. You may want to disable one of the adapters in your computer's BIOS (if possible) and/or remove the other card from your server. It looks like eth1 is connected but eth0 is not.

[davehalleng]

right after I posted this last night, I realized that it might be the nic and switched it. It's working great now, thanks.