Multiple NIC's

Post Reply
BillyMcSkintos
Posts: 2
Joined: Mon May 10, 2010 7:34 am

Multiple NIC's

Postby BillyMcSkintos » Mon May 10, 2010 7:35 am

Can I set up Amahi server to utilize multiple NIC's for network access?
Top
User avatar
cpg
Administrator
Posts: 2618
Joined: Wed Dec 03, 2008 7:40 am
Contact:
Contact cpg

Re: Multiple NIC's

Postby cpg » Mon May 10, 2010 11:57 am

amahi assumes the LAN is in eth0.

if you want to use eth1/eth2/.../ethn for other purposes, amahi will not interfere with that.
however, all amahi services run in eth0 and assume there is no firewall.

the wiki explains how to use eth1 for the LAN.
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Top
User avatar
moredruid
Expert
Posts: 791
Joined: Tue Jan 20, 2009 1:33 am
Location: Netherlands
Contact:
Contact moredruid

Re: Multiple NIC's

Postby moredruid » Mon May 10, 2010 11:41 pm

I think he refers to ethernet bonding (bundling 2 ethernet ports together to act as one). and yes, that's possible... check it here.

You'll have to figure out how by yourself tho, I haven't written it up yet.
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Top
User avatar
moredruid
Expert
Posts: 791
Joined: Tue Jan 20, 2009 1:33 am
Location: Netherlands
Contact:
Contact moredruid

Re: Multiple NIC's

Postby moredruid » Mon May 31, 2010 10:28 am

oooh can't resist to post this one :D
Attachments
network_bonding.jpg
network_bonding.jpg (24.74 KiB) Viewed 2243 times
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Top
Post Reply

Return to “Networking”

Who is online

Users browsing this forum: No registered users and 21 guests