kickstart method and raid

Post Reply
User avatar
marcel
Posts: 160
Joined: Sat May 16, 2009 12:46 am
Location: Netherlands

kickstart method and raid

Postby marcel » Sat Oct 24, 2009 12:47 am

What if i want a raid 1 configuration when i install fedora 11 and amahi with the kickstart method? It is not possible to do this during installation. So we have to this afterwards. Is this possible?
My HDA cpu: E1400 2Ghz; motherboard: Gigabyte GA-G33M-S2H; memory: Team 2Gb DDR2; 200GB OS HDD, 2x western digital GP 1TB storage HDDs; case: Antec P182
Top
User avatar
cpg
Administrator
Posts: 2618
Joined: Wed Dec 03, 2008 7:40 am
Contact:
Contact cpg

Re: kickstart method and raid

Postby cpg » Sat Oct 24, 2009 11:55 am

good question - i am not sure this is possible after the fact, unless you can segregate the disks from the OS disk (which is a good idea, in and of itself).
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Top
User avatar
moredruid
Expert
Posts: 791
Joined: Tue Jan 20, 2009 1:33 am
Location: Netherlands
Contact:
Contact moredruid

Re: kickstart method and raid

Postby moredruid » Mon Oct 26, 2009 6:11 am

you can do partitioning in a kickstart file. the problem with that is that you'll need to edit the .ks file to match your hardware.
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Top
Post Reply

Return to “Developers”

Who is online

Users browsing this forum: No registered users and 60 guests