Hello,
I have installed amahi on my eSata sheevaplug based on the instructions here:
http://wiki.amahi.org/index.php/Amahi_Plug_Edition and
http://wiki.amahi.org/index.php/Marvell ... er_Booting
Everything works fine except for eSata. The first thing I found is that the arcNumber needs to be set to 2678 for the eSata variant. This allows the kernel to detect the eSata port and port multiplier attached. However, I believe that it needs a kernel module sata_mv and this is not available on the supplied image. Can you help?
eSata Sheevaplug install
Re: eSata Sheevaplug install
Well I fixed this by updating the kernel and replacing it with the sheeva version from http://sheeva.with-linux.com/sheeva/2.6.35/2.6.35.13/
Bug raised http://bugs.amahi.org/issues/show/850
Bug raised http://bugs.amahi.org/issues/show/850
Re: eSata Sheevaplug install
I have cleaned up and updated all the wiki pages relating to the Sheevaplug. See here: http://wiki.amahi.org/index.php/Amahi_Plug_Edition
Re: eSata Sheevaplug install
I cant get my SD card to boot up, it says something about the kernel image, I can give an output on the error as soon as I come home, but one thing i noticed in http://wiki.amahi.org/index.php/Marvell ... er_Booting was this line for the SD:
/P
Shouldn't the redmarked numbers be the same?setenv bootcmd_mmc 'mmcinit; ext2load mmc 0:1 0x800000 /boot/uImage'
setenv bootcmd 'setenv bootargs $(bootargs_console) $(bootargs_root); run bootcmd_mmc; bootm 0x0800000'
/P
Re: eSata Sheevaplug install
Awesome work on updating documentation. We have not been able to actively working on the Amahi plug support due to other priorities and the sunset of Fedora 12.
We typically do not develop on older versions, but not sure if that applies here. I have not seen anything from Fedora 14 for ARM support. Until we do, I don't foresee us moving forward.
I am not trying to discourage anyone by any means. I just wanted to shed a little light on why the Amahi plug edition has not been updated. We appreciate all the assistance from the community in keeping this platform going for those who do use it.
We typically do not develop on older versions, but not sure if that applies here. I have not seen anything from Fedora 14 for ARM support. Until we do, I don't foresee us moving forward.
I am not trying to discourage anyone by any means. I just wanted to shed a little light on why the Amahi plug edition has not been updated. We appreciate all the assistance from the community in keeping this platform going for those who do use it.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: eSata Sheevaplug install
Maybe this could be something:We typically do not develop on older versions, but not sure if that applies here. I have not seen anything from Fedora 14 for ARM support. Until we do, I don't foresee us moving forward.
http://fedoraproject.org/wiki/Architectures/ARM
/P
Who is online
Users browsing this forum: No registered users and 2 guests