CLOSED: I've Broken Amahi-Sync
Posted: Sun Apr 14, 2019 7:41 am
All,
Had to do a reinstall of Amahi on home network which was successful I believe. All of my apps working with exception of Sync. (It was working previously so I expect I have done something or not to cause this.)
To note:
1) I manually installed two external HDD's in a NAS box and they are visible and viable. Install done per Wiki directions and I moved all shares to the new drives (some on each). Needless to say, Public folder was moved as well (I was not thinking) and naturally Sync would not work in the new location.
2) So following some advice from Forums and Wiki I believe I recreated the Public folder at /var/hda/files/Public....when I CD to that location i see a test file that i moved to the folder using a client PC.
3) Again following direction for this site I restarted the Sync service and believe it worked. That being said when i run this command:
tail -f /var/log/amahi-sync.log, the following output, indicating a sync error is received:
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.3]
190314-094136-817358: sync ended with exit status: 12
190314-094139-843611: sync errors found - sleeping to check later
Exiting Amahi Sync v0.30 normally with code(15)
Exiting Amahi Sync v0.30 with error code(0)
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.3]
Starting Amahi Sync v0.30
190314-100930-708561: sync ended with exit status: 12
190314-100932-733349: sync errors found - sleeping to check later
4) I'm stumped and am not sure what to try next. Grateful for any suggestions or direction. Thanks.
Scott
Had to do a reinstall of Amahi on home network which was successful I believe. All of my apps working with exception of Sync. (It was working previously so I expect I have done something or not to cause this.)
To note:
1) I manually installed two external HDD's in a NAS box and they are visible and viable. Install done per Wiki directions and I moved all shares to the new drives (some on each). Needless to say, Public folder was moved as well (I was not thinking) and naturally Sync would not work in the new location.
2) So following some advice from Forums and Wiki I believe I recreated the Public folder at /var/hda/files/Public....when I CD to that location i see a test file that i moved to the folder using a client PC.
3) Again following direction for this site I restarted the Sync service and believe it worked. That being said when i run this command:
tail -f /var/log/amahi-sync.log, the following output, indicating a sync error is received:
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.3]
190314-094136-817358: sync ended with exit status: 12
190314-094139-843611: sync errors found - sleeping to check later
Exiting Amahi Sync v0.30 normally with code(15)
Exiting Amahi Sync v0.30 with error code(0)
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.3]
Starting Amahi Sync v0.30
190314-100930-708561: sync ended with exit status: 12
190314-100932-733349: sync errors found - sleeping to check later
4) I'm stumped and am not sure what to try next. Grateful for any suggestions or direction. Thanks.
Scott