Storage pools
Storage pools
Installed F14 and amahi 6 ok, but when I look at the Shares tab in setup, I can't see anything regarding storage pools or file duplication? Do I need to install something else, or enable something?
-
- Posts: 5
- Joined: Fri Feb 11, 2011 9:40 pm
Re: Storage pools
How many storage partitions have you got?
If you have only 1 then it will not show up. You need to have 2 storage partitions (usually this would mean 2 physical drives)
If you have only 1 then it will not show up. You need to have 2 storage partitions (usually this would mean 2 physical drives)
Re: Storage pools
Hi - sorry for the delay: I have 4 drives - 2 in the lvm and 2 others formatted Ext4 and mounted under /media/xxx. I have 4 partitions displayed on the Amahi 'Storage/Partitions' screen in Setup. Brand new install, nothing on the disks other than the Fedora installation and Amahi 6 Beta. No clues anywhere as to how to enable file replication. Finally found the answer in the 'adding a hard drive' section on the wiki http://wiki.amahi.org/index.php/Adding_ ... o_your_HDA.
Finally, you'll need to configure Greyhole to select your new partition. To configure Greyhole, Advanced Settings must be enabled under Setup > Settings.
Ticked the box and 'Storage Pool' appears on the Shares tab - This should be mentioned in the Install guide.
Finally, you'll need to configure Greyhole to select your new partition. To configure Greyhole, Advanced Settings must be enabled under Setup > Settings.
Ticked the box and 'Storage Pool' appears on the Shares tab - This should be mentioned in the Install guide.
Who is online
Users browsing this forum: No registered users and 52 guests