I have the same problem, IPSec not working, i have tried uninstalling and rebooting the hda, when I check in settings the IPSec server shows as stopped and if I try to start it nothing happens, it just remains on stopped. I have forwarded the neccessary ports on my router, I have also tried Openvpn, but it has the same symptoms, showing as stopped and impossible to start.
Can you provide a checklist of what else to investigate? Is there any commands I could try when im logged in the server through putty to get more info about this issue?
IPSec not working at all.
Re: IPSec not working at all.
Are you using Ubuntu? Desktop or Server? Also have you tried starting them from the command line? Please check the logs for errors in /var/log folder.
We want to help diagnose the issue but need more details.
We want to help diagnose the issue but need more details.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: IPSec not working at all.
Yes i´m using Ubuntu, desktop version, I will check the logs tonight and see what they say.
Thank you
Thank you
-
- Posts: 10
- Joined: Sun Oct 21, 2012 4:43 am
Re: IPSec not working at all.
Sorry to be a pain, but I recently installed a new forget and the elite make had changed from unsuccessful to timeout! Could this be an issue with BT home hubs as I switched from a home hub 2 to a home hub 3.
Many thanks.
[ Post made via Android ]
Many thanks.
[ Post made via Android ]
Re: IPSec not working at all.
Not familiar with this setup. Any change in network setup could cause failure.
[ Post made via Android ]
[ Post made via Android ]
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: IPSec not working at all.
I am having the same problem with my IPSec VPN, which used to work perfectly until sometime after Christmas. The iPad reports that it is unable to get a response from the server, and looking at firewall logs and doing a packet dump, I can see the initial connection, but this does not progress. As I understand it, the authentication is done on port 500 and the established connection is on port 4500, but I only see Port 500 traffic in the logs.
I don''t get any log entries for Racoon at all, which is one of the frustrating things about it. I don't know whether this means that the connections are not getting that far, or they are not being logged. I have tried disabling the HDA firewall, but that does not make any difference, and I can see traffic, suggesting that it is not a firewall issue.
I have resorted to using OpenVPN instead, which does work.
I am happy to do more testing - I have uninstalled and reinstalled and checked the config files. I am not sure what should be logged where with Racoon.
J
I don''t get any log entries for Racoon at all, which is one of the frustrating things about it. I don't know whether this means that the connections are not getting that far, or they are not being logged. I have tried disabling the HDA firewall, but that does not make any difference, and I can see traffic, suggesting that it is not a firewall issue.
I have resorted to using OpenVPN instead, which does work.
I am happy to do more testing - I have uninstalled and reinstalled and checked the config files. I am not sure what should be logged where with Racoon.
J
Re: IPSec not working at all.
hey having the same issue on amahi 7/fedora 19,
I did find the log file though and it contained these lines:
(hiding the ip just in case )
I did find the log file though and it contained these lines:
(hiding the ip just in case )
Code: Select all
[root@localhost ~]# more /var/log/amahi-ipsec-vpn.log
[Thu Oct 29 00:54:52 CET 2015]: user 'InteNs' disconnected as IP[] from IP[**.***.***.**]
[Thu Oct 29 01:00:46 CET 2015]: user 'InteNs' disconnected as IP[] from IP[**.***.***.**]
[Thu Oct 29 01:01:41 CET 2015]: user 'InteNs' disconnected as IP[] from IP[**.***.***.**]
[Thu Oct 29 01:02:03 CET 2015]: user 'InteNs' disconnected as IP[] from IP[**.***.***.**]
[Thu Oct 29 01:02:34 CET 2015]: user 'InteNs' disconnected as IP[] from IP[**.***.***.**]
Re: IPSec not working at all.
Please submit a bug report and provide the URL from the following command:
Also describe the issue in detail and any steps you have taken to correct the problem.
Code: Select all
fpaste --sysinfo
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Who is online
Users browsing this forum: No registered users and 54 guests