Application Error!!!!! HELP!!

[dombooth]

Hi all,

Whenever i attempt to access the hda i get the error message...

"Application error
The application has found an error. You will be forwarded shortly."

Attached is the print screen,

HDA Error.png (220.58 KiB) Viewed 3596 times

It just keeps refreshing the page,

It wont let me access anything from it.

Any suggestions appreciated!
Cheers
Dom

[bigfoot65]

Looks like you do not have connectivity. Please try the network troubleshooter and report back the results.

http://wiki.amahi.org/index.php/Network_troubleshooting

[dombooth]

Looks like you do not have connectivity. Please try the network troubleshooter and report back the results.

http://wiki.amahi.org/index.php/Network_troubleshooting

Hi,

Picture1.png (362.29 KiB) Viewed 3592 times

My router wont let me turn off DHCP.

Dom

[bigfoot65]

That is surprising. What make/model is it? Have you googled to see if/how to turn it off? I have not encountered one yet that you could not disable it, but there is always a first.

[dombooth]

That is surprising. What make/model is it? Have you googled to see if/how to turn it off? I have not encountered one yet that you could not disable it, but there is always a first.

It's some ancient thing TBH, Sumvision Sohospeed G Plus ASW800. Theres no setting i can see to turn it off.



EDIT: Just found it! lol

[bigfoot65]

Awesome....hope that helps.

[dombooth]

Awesome....hope that helps.

CMD on the client gives this VVVV


Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Dominic Booth>nslookup hda
Server: hda.booth.co.uk
Address: 192.168.1.2

Non-authoritative answer:
Name: hda
Address: 67.215.65.132

C:\Users\Dominic Booth>

Whereas the network troubleshooting thing says it should be this VVV

Server: 192.168.1.2
Address: 192.168.1.2#53

Name: hda.booth.co.uk
Address: 192.168.1.2

Is it right or..?

[bigfoot65]

You need to refresh IP for all clients after you turn off the router DHCP server. The wiki has lots of useful info that might help you.

http://wiki.amahi.org

[dombooth]

You need to refresh IP for all clients after you turn off the router DHCP server. The wiki has lots of useful info that might help you.

http://wiki.amahi.org

Hi,

It doesn't seem to want to get an IP, could i just use manual IP settings so it uses the server for DNS? (Below)
for example
IP Address - 192.168.1.X
Subnet Mask - 255.255.255.0
Default Gateway - 192.168.1.1
DNS - 192.168.1.2

Could i do this?

[bigfoot65]

Come by the IRC and we can try to sort this out.