503 on clean install

eldano
Posts: 60
Joined: Fri Dec 17, 2010 2:26 am
Location: The Netherlands

503 on clean install

Postby eldano » Fri Dec 17, 2010 10:13 am

I get a 503 response when i try to access http://sabnzbd.home.com/

I did a clean install on a whole new computer with new clean drives.
I installed Transmission via the http://hda/setup?sub=available&tab=app . Works perfect. In the same way I installed sabnzdb, but when I want to access it I get a 503 error response.

I have no real Linux experience, but have been reading the other post about the 503 error in this section. What I have tried:

Int the terminal as root:

service sabnzbd status
sabnzbd: unrecognized service


So I think it is not running or even installed? I have no clue what to do next. hda setup says that it is installed..

Your help will be much appreciated!

Cheers,
Dan
Last edited by eldano on Sat Dec 18, 2010 4:26 am, edited 1 time in total.

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: 503 on clean install

Postby bigfoot65 » Fri Dec 17, 2010 12:16 pm

Please check the /var/log/amahi-app-installer.log for this app and report any errors. Something is not installing correctly obviously.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

eldano
Posts: 60
Joined: Fri Dec 17, 2010 2:26 am
Location: The Netherlands

Re: 503 on clean install

Postby eldano » Sat Dec 18, 2010 4:25 am

Thanks for the quick reply!

What I did now was; uninstall, reboot system, and install again.

This is what is in the install log:
======= app uninstall begin @ Sat Dec 18 12:10:22 +0100 2010 ==========
Uninstalling app id wsl3fc8t0d under /var/hda/platform/html ENV=production
cp: cannot stat `/var/spool/sabnzbd/sabnzbd.ini': No such file or directory
Your HDA services have been restarted.
App: SABnzbd uninstalled
======= app uninstall end @ Sat Dec 18 12:10:28 +0100 2010 ==========
======= app install begin @ Sat Dec 18 12:13:07 +0100 2010 ==========
Installing app id wsl3fc8t0d under /var/hda/platform/html ENV=production
Your HDA services have been restarted.
Your HDA services have been restarted.
/var/hda/web-apps/sabnzbd/elevated/start.sh: line 1: /etc/init.d/sabnzbd: No such file or directory
App: SABnzbd installed
======= app install end @ Sat Dec 18 12:13:27 +0100 2010 ==========
I checked that '/var/spool/' exists, but can't locate the sabnzbd dir.

sckang
Posts: 15
Joined: Thu Dec 02, 2010 2:26 am

Re: 503 on clean install

Postby sckang » Sat Dec 18, 2010 7:30 am


eldano
Posts: 60
Joined: Fri Dec 17, 2010 2:26 am
Location: The Netherlands

Re: 503 on clean install

Postby eldano » Sat Dec 18, 2010 8:07 am

I checked your post quick and seems somewhat similar. I tried to install gallery 3 and see if that would work in my case. And it seems to load http://gallery3.home.com/ normally.

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: 503 on clean install

Postby bigfoot65 » Sat Dec 18, 2010 9:55 am

Ok, I think I found the problem and have corrected it. Please uninstall and reinstall. Report if you have success or not.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

eldano
Posts: 60
Joined: Fri Dec 17, 2010 2:26 am
Location: The Netherlands

Re: 503 on clean install

Postby eldano » Sat Dec 18, 2010 10:31 am

Ok, I think I found the problem and have corrected it. Please uninstall and reinstall. Report if you have success or not.
Nope still 503 :( (even after reboot)

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: 503 on clean install

Postby bigfoot65 » Sat Dec 18, 2010 10:41 am

The command to start is:

/usr/bin/sabnzbd

Do this as root and see what happens? Now the start up is not instantaneous so give it a minute. Also, you may need to purge your browser cache.

I tested this in a 32-bit Fedora 12 Amahi VM and it works fine.
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

eldano
Posts: 60
Joined: Fri Dec 17, 2010 2:26 am
Location: The Netherlands

Re: 503 on clean install

Postby eldano » Sun Dec 19, 2010 4:56 am

The install does not seem to be there.

as root /usr/bin/sabnzbd gives me back:
-bash: usr/bin/sabnzbd: No such file or directory
You have mail in /var/spool/mail/root
?? Could it be that I don't have right or something to write in certain directories during install of sabnzbd?

User avatar
bigfoot65
Project Manager
Posts: 11924
Joined: Mon May 25, 2009 4:31 pm

Re: 503 on clean install

Postby bigfoot65 » Sun Dec 19, 2010 7:28 am

Something is definitely missing. Please uninstall the app. Then go to /var/hda/web-apps and see if there is any directories labeled sabnzbd. If there is, then you need to remove them.

I am running out of ideas. I have tried this several times on a VM and it works fine. So you have a connectivity issue possibly?
ßîgƒσστ65
Applications Manager

My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2

Who is online

Users browsing this forum: No registered users and 9 guests