Page 2 of 3

Re: Cannot add disk to pool

Posted: Mon Apr 15, 2019 3:38 am
by bigfoot65
The command has two hyphens (--).

Please try again.

Re: Cannot add disk to pool

Posted: Mon Apr 15, 2019 4:31 am
by bleriot
done :)

Re: Cannot add disk to pool

Posted: Mon Apr 15, 2019 5:26 am
by bigfoot65
Can you please post the URL?

Re: Cannot add disk to pool

Posted: Mon Apr 15, 2019 7:27 am
by bleriot
Sorry, now I understand what it was that you asked for ;) ;) ;)

https://paste.fedoraproject.org/paste/x ... pCllszIR2g

thanks

Re: Cannot add disk to pool

Posted: Mon Apr 15, 2019 2:28 pm
by bigfoot65
I see you are using the Express CD.

Noticed you improperly setup your OS drive. The majority of your disk space is in the /home directory.

Also don’t see any additional drives connected.

Did you follow the guidance I provided earlier to mount your Drives?

Re: Cannot add disk to pool

Posted: Tue Apr 16, 2019 12:34 am
by bleriot
thanks for your reply

I indeed have 2 drives connected and these are visible in cockpit as /dev/sdb1 and /dev/sdc1, and also in the Amahi setup pane disks/devices.

When installing Amahi I used the default settings in the installation procedure. Should I reinstall the hole system, but then what should I do different. Also where can I find the info on that?
I do believe that I've followed all the guides that are there, but I could be wrong.

Also, since I need to run this system on a headless, system (HP X510 Data Vault), I have to install the system on another machine and then move the drive to the X510. When i boot the system in the X510, and log in into the server, the 2 disks are "recognized" as stated, but nothing more.

Thanks :)

Re: Cannot add disk to pool

Posted: Tue Apr 16, 2019 1:16 am
by bleriot
Hi again

I did try the guide you gave me. I've been going thru it several times, and now it seemed to work properly.

I'll give you some more feedback when I have tinkered with it a bit more.

Thank you for your help so far :)

Re: Cannot add disk to pool

Posted: Tue Apr 16, 2019 5:49 am
by bigfoot65
No problem.

I presume we can mark this closed.

Re: Cannot add disk to pool

Posted: Tue Apr 16, 2019 3:25 pm
by bleriot
Sorry, but not yet :cry:

I did the hda-diskmount and the disks got added to the pool. so far so good.
I then added the "blue" line just like in the guide, an now I cant get the machine to boot!!!

I says " You are in emergency mode. After logging in, type "journalctl -xb" etc. etc. etc.

Cannot open access to console, the root account is locked.
See sulogin(8) man page for more details

Press enter to continue

Now what? :shock:

Re: Cannot add disk to pool

Posted: Tue Apr 16, 2019 4:13 pm
by bigfoot65
Oh no that’s not good.

It’s fixable, but rather complicated. You’d have to find the guidance on the internet. It may take a while to fix too.

Would be best to restart unfortunately.