Amahi Forums

Hi there,
Hope someone can help, my Amahi dashboard say's I am successfully signed in as I have physically signed in (written in green at top left of page). I can also go into my control panel no problem. I thought I could not get the setup button due to going into dashboard via http://hda as once I went into it using 192.168.0.10 (this is in my router also) I could see and use the setup button.

I have tried rebooting router with DHCP off, I have tried rebooting Amahi server after doing this and so on and so on. One thing I am not happy about is the fact that in the Amahi control panel it is showing my Virgin Router's (used in modem mode) WAN IP address at the very top and not my Asus routers static IP address 192.168.0.10 that I setup for the HDA. It does show this address further down in the control panel under NETWORK etc.

I would be very grateful for any help I can get as I am about to give up.
Many thanks
Peter

What is this Setup button you keep referring to?

The IP address of your HDA is not the router up address. You should have set the HDA up address when you created the HDA profile on amahi.org.

You need to provide more details in order for us to assist.

download/file.php?mode=view&id=802

Hope this helps, there is no setup button when logged into hda. As you can see I have added an app Zenphoto to the page.

Many thanks,
Peter

Yes that helps a great deal.

So is this user an admin user? The user you created when installing Fedora is the admin user for Amahi.

Only admin users have access to the Setup area.