Amahi Forums

I'm at appoint where the server is working about 50%.
there are about 4 issues I can't resolve...
Installing the necessary app's is very difficult for me and I'm just now getting familiar with this program...

Question: I installed a new hard drive for more disk space and I must have done it wrong... it is not recognized, also, My status on the control panel is "not running"??? and I can't access my home server dashboard... what happened? I don't think it's me... My network is still working (somewhat)

Should I abandon everything and start over? How do I do that? other than reloading Fedora 25....

Being unfamiliar with this program, it is difficult to navigate through the steps as explained in the readings. I don't believe I know what apps to buy and install for the complete benefit of your product.

Resolve is awesome... There may be some detailed information as to some of the "self imposed" and "file corruption" issues identified coming from the Team...

I'll attempt at a later date.

FYI: The Amahi support has been TOPs assisting me and working through this install... "Real Happy" Product and Service.

Great to hear things are back on track!

Post any issues here. The corruption in MariaDB could be a combination of drive being full and possibly power outages coming in at the wrong time. Hopefully this does not happen again.

For printer, I would say go to Network > Fixed IPs and set the IP of your networked printer as a fixed IP, so its easier to locate by name and IP. You can find the MAC address for it from the DHCP Leases page.

Question: I installed a new hard drive for more disk space and I must have done it wrong... it is not recognized

Drives that are added to Linux are not mounted by default.

You have two options, install the disk-wizard App or follow the manual guidance.

BTW, the #Amahi wiki is a great source of how to's and guidance.

Is this resolved?

If so we will mark it as closed.