Hey,
I would have normally posted this in the appropriate SABNZBD forum, but i think the solution to this issue is simple and it belongs in the NOOB section. I know exactly how i screwed the pooch but i cant figure out how to get where i need to go to fix it. I was working with my usenet indexer to download directly from them (i use couch potato normally). My SABNZBD was set to listen to 0.0.0.0 and worked fine. The genius move was to put it to http://localhost:25915/ as i thought this would get me direct access to the indexer. Rebooting was part of the change and lo and behold i received a 503 error - "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later." I noticed the SABNZBD server was not running and would not start. I rebooted the server and still receive the same error.
I have a feeling i need to get into file to manually change the "http://localhost:25915/" screw up back to the 0.0.0.0 address which worked...the problem is...i cant figure out how to get to the specific area to do so.
Any help here would be appreciated...
Your Noobian Friend
bird
CLOSED: SABNZBD Screw Up
Re: SABNZBD Screw Up
You will need to edit the sabnzbd.ini file in /var/hda/web-apps/sabnzbdplus/html directory.
The you should be able to restart the server.
There is a SABnzbd page in the wiki with info as well.
The you should be able to restart the server.
There is a SABnzbd page in the wiki with info as well.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: SABNZBD Screw Up
Thank you, as usual, for your time. I have modified sabnzb.ini file in one location to:
Restarted the web server by:
It not work. Does the http://0.0.0.0/ need to have localhost before. Do you see any other glaring errors? Are there any other locations that might need editing?
Thanks again.
Code: Select all
http://0.0.0.0
Code: Select all
systemctl restart httpd
Thanks again.
Re: SABNZBD Screw Up
You don't need to restart the web server. It's SABnzbd that needs restarted. That can be done via the Dashboard, Servers section in the Settings tab.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: SABNZBD Screw Up
more info:
I changed http://0.0.0.0/ to http://0.0.0.0:25915/
Restarted:
Ran:
[codesabnzbd.service - SABnzbd Plus server
Loaded: loaded (/usr/lib/systemd/system/sabnzbd.service; enabled)
Active: failed (Result: exit-code) since Mon 2016-10-03 10:40:11 EDT; 20s ago
Process: 4578 ExecStart=/var/hda/web-apps/sabnzbdplus/html/SABnzbd.py --browser 0 --daemon --pid /var/run/sabnzbd/ --config-file /var/hda/web-apps/sabnzbdplus/html/sabnzbd.ini (code=exited, status=2)
Process: 4576 ExecStartPre=/usr/bin/chown -R apache:users /var/run/sabnzbd/ (code=exited, status=0/SUCCESS)
Process: 4573 ExecStartPre=/usr/bin/mkdir -p /var/run/sabnzbd/ (code=exited, status=0/SUCCESS)
Oct 03 10:40:11 localhost.localdomain systemd[1]: sabnzbd.service: control pr...
Oct 03 10:40:11 localhost.localdomain systemd[1]: Failed to start SABnzbd Plu...
Oct 03 10:40:11 localhost.localdomain systemd[1]: Unit sabnzbd.service entere...
Oct 03 10:40:11 localhost.localdomain systemd[1]: sabnzbd.service failed.
Hint: Some lines were ellipsized, use -l to show in full.][/code]
I changed http://0.0.0.0/ to http://0.0.0.0:25915/
Restarted:
Code: Select all
systemctl restart sabnzbd
Code: Select all
systemctl status sabnzbd.service
[codesabnzbd.service - SABnzbd Plus server
Loaded: loaded (/usr/lib/systemd/system/sabnzbd.service; enabled)
Active: failed (Result: exit-code) since Mon 2016-10-03 10:40:11 EDT; 20s ago
Process: 4578 ExecStart=/var/hda/web-apps/sabnzbdplus/html/SABnzbd.py --browser 0 --daemon --pid /var/run/sabnzbd/ --config-file /var/hda/web-apps/sabnzbdplus/html/sabnzbd.ini (code=exited, status=2)
Process: 4576 ExecStartPre=/usr/bin/chown -R apache:users /var/run/sabnzbd/ (code=exited, status=0/SUCCESS)
Process: 4573 ExecStartPre=/usr/bin/mkdir -p /var/run/sabnzbd/ (code=exited, status=0/SUCCESS)
Oct 03 10:40:11 localhost.localdomain systemd[1]: sabnzbd.service: control pr...
Oct 03 10:40:11 localhost.localdomain systemd[1]: Failed to start SABnzbd Plu...
Oct 03 10:40:11 localhost.localdomain systemd[1]: Unit sabnzbd.service entere...
Oct 03 10:40:11 localhost.localdomain systemd[1]: sabnzbd.service failed.
Hint: Some lines were ellipsized, use -l to show in full.][/code]
Re: SABNZBD Screw Up
What should the host line read?
I have tried a few variations. The current one is:
I have tried a few variations. The current one is:
Code: Select all
http://0.0.0.0:25915/
Re: SABNZBD Screw Up
Best that you uninstall, then reinstall sabnzbd-plus App
Ensure you remove the sabnzbd.ini from the Newsgroup share before reinstalling.
That should put it back to normal.
Ensure you remove the sabnzbd.ini from the Newsgroup share before reinstalling.
That should put it back to normal.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Re: SABNZBD Screw Up
I figured as much. Thanks for your time.
Re: SABNZBD Screw Up
No problem.
Will mark this as closed.
Will mark this as closed.
ßîgƒσστ65
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Applications Manager
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 16GB RAM, 1TBx1+2TBx2+4TBx2
Who is online
Users browsing this forum: No registered users and 66 guests