Cannot access HDA, ruby not started, cannot load puginfacory

LesGirauds
Posts: 4
Joined: Sun May 06, 2012 7:52 am

Cannot access HDA, ruby not started, cannot load puginfacory

Postby LesGirauds » Sun May 06, 2012 8:05 am

Hello all. I've recently installed the 5.4 express. All went well, the hda is shown as running on the control panel and I can log into it via ssh. However, I cannot reach the hda and get a "Ruby on Rails application could not be started" message.

The message also says "no such file to load -- pluginfactory (MissingSourceFile)".

Search the forum on that message and was advised to install pluginfactory (gem install pluginfactory).

That gives me "*** buffer overflow detected ***: /usr/bin/ruby terminated"

and the following....

======= Backtrace: =========
/lib/libc.so.6(__fortify_fail+0x4d)[0x20435d]
/lib/libc.so.6(-0xffbf6b86)[0x20247a]
/usr/lib/ruby/1.8/i386-linux/syck.so(rb_syck_mktime+0x58f)[0x5eb56f]
/usr/lib/ruby/1.8/i386-linux/syck.so(yaml_org_handler+0x91d)[0x5ebf4d]
/usr/lib/ruby/1.8/i386-linux/syck.so(syck_defaultresolver_node_import+0x40)[0x5ec200]
/usr/lib/libruby.so.1.8(+0x25e53)[0xf22e53]
/usr/lib/libruby.so.1.8(+0x30c39)[0xf2dc39]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x31a9c)[0xf2ea9c]
/usr/lib/libruby.so.1.8(rb_funcall+0x25)[0xf2ec25]
/usr/lib/ruby/1.8/i386-linux/syck.so(rb_syck_load_handler+0x6e)[0x5e9a1e]
/usr/lib/ruby/1.8/i386-linux/syck.so(syck_hdlr_add_node+0x42)[0x5e6532]
/usr/lib/ruby/1.8/i386-linux/syck.so(syckparse+0xb75)[0x5dfe15]
/usr/lib/ruby/1.8/i386-linux/syck.so(syck_parse+0x33)[0x5ed183]
/usr/lib/ruby/1.8/i386-linux/syck.so(syck_parser_load+0x106)[0x5ec5d6]
/usr/lib/libruby.so.1.8(+0x25e78)[0xf22e78]
/usr/lib/libruby.so.1.8(+0x30c39)[0xf2dc39]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e137)[0xf2b137]
/usr/lib/libruby.so.1.8(+0x2d472)[0xf2a472]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e137)[0xf2b137]
/usr/lib/libruby.so.1.8(+0x2d472)[0xf2a472]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e137)[0xf2b137]
/usr/lib/libruby.so.1.8(+0x2e5df)[0xf2b5df]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e048)[0xf2b048]
/usr/lib/libruby.so.1.8(+0x2d7b6)[0xf2a7b6]
/usr/lib/libruby.so.1.8(+0x2e805)[0xf2b805]
/usr/lib/libruby.so.1.8(+0x2f691)[0xf2c691]
/usr/lib/libruby.so.1.8(+0x2bb0d)[0xf28b0d]
/usr/lib/libruby.so.1.8(+0x2f691)[0xf2c691]
/usr/lib/libruby.so.1.8(+0x3adbb)[0xf37dbb]
/usr/lib/libruby.so.1.8(+0x25e5d)[0xf22e5d]
/usr/lib/libruby.so.1.8(+0x30c39)[0xf2dc39]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e048)[0xf2b048]
/usr/lib/libruby.so.1.8(+0x2eb3b)[0xf2bb3b]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e137)[0xf2b137]
/usr/lib/libruby.so.1.8(+0x2eb3b)[0xf2bb3b]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(rb_funcall2+0x69)[0xf2e6c9]
/usr/lib/libruby.so.1.8(rb_obj_call_init+0x58)[0xf2e768]
/usr/lib/libruby.so.1.8(rb_class_new_instance+0x3b)[0xf5d7eb]
/usr/lib/libruby.so.1.8(+0x25e78)[0xf22e78]
/usr/lib/libruby.so.1.8(+0x30c39)[0xf2dc39]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(rb_call_super+0x8d)[0xf36fbd]
/usr/lib/libruby.so.1.8(+0x301dd)[0xf2d1dd]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e048)[0xf2b048]
/usr/lib/libruby.so.1.8(+0x2d472)[0xf2a472]
/usr/lib/libruby.so.1.8(+0x2e805)[0xf2b805]
/usr/lib/libruby.so.1.8(+0x30ad9)[0xf2dad9]
/usr/lib/libruby.so.1.8(+0x30dda)[0xf2ddda]
/usr/lib/libruby.so.1.8(+0x2e137)[0xf2b137]
======= Memory map: ========
00110000-0027f000 r-xp 00000000 08:01 4482521 /lib/libc-2.11.2.so
0027f000-00280000 ---p 0016f000 08:01 4482521 /lib/libc-2.11.2.so
00280000-00282000 r--p 0016f000 08:01 4482521 /lib/libc-2.11.2.so
00282000-00283000 rw-p 00171000 08:01 4482521 /lib/libc-2.11.2.so
00283000-00286000 rw-p 00000000 00:00 0
00286000-002c3000 r-xp 00000000 08:01 4260440 /usr/lib/ruby/1.8/i386-linux/openssl.so
002c3000-002c5000 rw-p 0003c000 08:01 4260440 /usr/lib/ruby/1.8/i386-linux/openssl.so
002c5000-002c8000 r-xp 00000000 08:01 4260424 /usr/lib/ruby/1.8/i386-linux/digest.so
002c8000-002c9000 rw-p 00002000 08:01 4260424 /usr/lib/ruby/1.8/i386-linux/digest.so
002c9000-002ca000 r-xp 00000000 08:01 4261328 /usr/lib/ruby/1.8/i386-linux/fcntl.so
002ca000-002cb000 rw-p 00000000 08:01 4261328 /usr/lib/ruby/1.8/i386-linux/fcntl.so
002cb000-002d0000 r-xp 00000000 08:01 4261330 /usr/lib/ruby/1.8/i386-linux/stringio.so
002d0000-002d1000 rw-p 00004000 08:01 4261330 /usr/lib/ruby/1.8/i386-linux/stringio.so
002d1000-002dc000 r-xp 00000000 08:01 4481283 /lib/libnss_files-2.11.2.so
002dc000-002dd000 r--p 0000a000 08:01 4481283 /lib/libnss_files-2.11.2.so
002dd000-002de000 rw-p 0000b000 08:01 4481283 /lib/libnss_files-2.11.2.so
002de000-002e3000 r-xp 00000000 08:01 4481281 /lib/libnss_dns-2.11.2.so
002e3000-002e4000 r--p 00004000 08:01 4481281 /lib/libnss_dns-2.11.2.so
002e4000-002e5000 rw-p 00005000 08:01 4481281 /lib/libnss_dns-2.11.2.so
002f5000-00313000 r-xp 00000000 08:01 4482520 /lib/ld-2.11.2.so
00313000-00314000 r--p 0001d000 08:01 4482520 /lib/ld-2.11.2.so
00314000-00315000 rw-p 0001e000 08:01 4482520 /lib/ld-2.11.2.so
00369000-0036a000 r-xp 00000000 00:00 0 [vdso]
0041e000-00420000 r-xp 00000000 08:01 4260433 /usr/lib/ruby/1.8/i386-linux/etc.so
00420000-00421000 rw-p 00001000 08:01 4260433 /usr/lib/ruby/1.8/i386-linux/etc.so
0048f000-00492000 r-xp 00000000 08:01 4482523 /lib/libdl-2.11.2.so
00492000-00493000 r--p 00002000 08:01 4482523 /lib/libdl-2.11.2.so
00493000-00494000 rw-p 00003000 08:01 4482523 /lib/libdl-2.11.2.so
00496000-004ac000 r-xp 00000000 08:01 4482526 /lib/libpthread-2.11.2.so
004ac000-004ad000 r--p 00015000 08:01 4482526 /lib/libpthread-2.11.2.so
004ad000-004ae000 rw-p 00016000 08:01 4482526 /lib/libpthread-2.11.2.so
004ae000-004b0000 rw-p 00000000 00:00 0
004b2000-004c4000 r-xp 00000000 08:01 4482525 /lib/libz.so.1.2.3
004c4000-004c5000 rw-p 00011000 08:01 4482525 /lib/libz.so.1.2.3
004c7000-004e3000 r-xp 00000000 08:01 4482537 /lib/libselinux.so.1
004e3000-004e4000 r--p 0001b000 08:01 4482537 /lib/libselinux.so.1
004e4000-004e5000 rw-p 0001c000 08:01 4482537 /lib/libselinux.so.1
004e7000-0050f000 r-xp 00000000 08:01 4482530 /lib/libm-2.11.2.so
0050f000-00510000 r--p 00027000 08:01 4482530 /lib/libm-2.11.2.so
00510000-00511000 rw-p 00028000 08:01 4482530 /lib/libm-2.11.2.so
00513000-0051a000 r-xp 00000000 08:01 4482533 /lib/librt-2.11.2.so
0051a000-0051b000 r--p 00006000 08:01 4482533 /lib/librt-2.11.2.so
0051b000-0051c000 rw-p 00007000 08:01 4482533 /lib/librt-2.11.2.so
00594000-0059f000 r-xp 00000000 08:01 4260447 /usr/lib/ruby/1.8/i386-linux/socket.so
0059f000-005a0000 rw-p 0000a000 08:01 4260447 /usr/lib/ruby/1.8/i386-linux/socket.so
005d8000-005f4000 r-xp 00000000 08:01 4261332 /usr/lib/ruby/1.8/i386-linux/syck.so
005f4000-005f5000 rw-p 0001b000 08:01 4261332 /usr/lib/ruby/1.8/i386-linux/syck.so
00609000-0061d000 r-xp 00000000 08:01 4482546 /lib/libresolv-2.11.2.so
0061d000-0061e000 ---p 00014000 08:01 4482546 /lib/libresolv-2.11.2.so
0061e000-0061f000 r--p 00014000 08:01 4482546 /lib/libresolv-2.11.2.so
0061f000-00620000 rw-p 00015000 08:01 4482546 /lib/libresolv-2.11.2.so
00620000-00622000 rw-p 00000000 00:00 0
00675000-006ba000 r-xp 00000000 08:01 4482527 /lib/libfreebl3.so
006ba000-006bb000 rw-p 00045000 08:01 4482527 /lib/libfreebl3.so
006bb000-006bf000 rw-p 00000000 00:00 0
006c1000-006c8000 r-xp 00000000 08:01 4482528 /lib/libcrypt-2.11.2.so
006c8000-006c9000 r--p 00007000 08:01 4482528 /lib/libcrypt-2.11.2.so
006c9000-006ca000 rw-p 00008000 08:01 4482528 /lib/libcrypt-2.11.2.so
006ca000-006f1000 rw-p 00000000 00:00 0
00739000-0073b000 r-xp 00000000 08:01 4482549 /lib/libcom_err.so.2.1
0073b000-0073c000 rw-p 00002000 08:01 4482549 /lib/libcom_err.so.2.1
0073e000-00746000 r-xp 00000000 08:01 4482547 /lib/libkrb5support.so.0.1
00746000-00747000 rw-p 00007000 08:01 4482547 /lib/libkrb5support.so.0.1
00749000-0074b000 r-xp 00000000 08:01 4482545 /lib/libkeyutils-1.2.so
0074b000-0074c000 rw-p 00001000 08:01 4482545 /lib/libkeyutils-1.2.so
0074e000-008c1000 r-xp 00000000 08:01 4230433 /usr/lib/libcrypto.so.1.0.0a
008c1000-008d5000 rw-p 00172000 08:01 4230433 /usr/lib/libcrypto.so.1.0.0a
008d5000-008d8000 rw-p 00000000 00:00 0
008da000-00904000 r-xp 00000000 08:01 4482548 /lib/libk5crypto.so.3.1
00904000-00905000 rw-p 0002a000 08:01 4482548 /lib/libk5crypto.so.3.1
00907000-009ba000 r-xp 00000000 08:01 4482550 /lib/libkrb5.so.3.3
009ba000-009c0000 rw-p 000b3000 08:01 4482550 /lib/libkrb5.so.3.3
009c2000-009df000 r-xp 00000000 08:01 4482542 /lib/libgcc_s-4.4.3-20100127.so.1
009df000-009e0000 rw-p 0001c000 08:01 4482542 /lib/libgcc_s-4.4.3-20100127.so.1
009e2000-00a0f000 r-xp 00000000 08:01 4482551 /lib/libgssapi_krb5.so.2.2
00a0f000-00a10000 rw-p 0002d000 08:01 4482551 /lib/libgssapi_krb5.so.2.2
00c11000-00c15000 r-xp 00000000 08:01 4260452 /usr/lib/ruby/1.8/i386-linux/thread.so
00c15000-00c16000 rw-p 00003000 08:01 4260452 /usr/lib/ruby/1.8/i386-linux/thread.so
00ce2000-00d35000 r-xp 00000000 08:01 4229527 /usr/lib/libssl.so.1.0.0a
00d35000-00d39000 rw-p 00053000 08:01 4229527 /usr/lib/libssl.so.1.0.0a
00ead000-00eb6000 r-xp 00000000 08:01 4261334 /usr/lib/ruby/1.8/i386-linux/zlib.so
00eb6000-00eb7000 rw-p 00009000 08:01 4261334 /usr/lib/ruby/1.8/i386-linux/zlib.so
00efd000-00fdd000 r-xp 00000000 08:01 4228825 /usr/lib/libruby.so.1.8.6
00fdd000-00fe0000 rw-p 000df000 08:01 4228825 /usr/lib/libruby.so.1.8.6
00fe0000-00ff0000 rw-p 00000000 00:00 0
08048000-08049000 r-xp 00000000 08:01 4228910 /usr/bin/ruby
08049000-0804a000 rw-p 00000000 08:01 4228910 /usr/bin/ruby
0848e000-08f27000 rw-p 00000000 00:00 0 [heap]
b7196000-b7397000 rw-p 00000000 00:00 0
b7397000-b7491000 rw-p 00000000 00:00 0
b75f7000-b7866000 rw-p 00000000 00:00 0
b786a000-b786f000 rw-p 00000000 00:00 0
bf88c000-bf8a7000 rw-p 00000000 00:00 0 [stack]
Aborted
=====

I've searched the forum but haven't found anything. What's my next step?

User avatar
bigfoot65
Project Manager
Posts: 11419
Joined: Mon May 25, 2009 4:31 pm

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby bigfoot65 » Sun May 06, 2012 5:05 pm

Check the hda-install.log in the root folder I believe for errors. Ensure you check the checksum for the Express CD image. If it is corrupt, it still might install but not work properly.

I have also seen where the Express CD does not have the necessary drivers for some hardware. It might be a good idea to try the Fedora 14 Full DVD install unless there is some reason you cannot.

The Express CD is meant to be headless of course, but it does have some issues occasionally that we cannot seem to pinpoint. They only happen occasionally it seems. You can do a headless install with the Full DVD as well, just a little more work.
ßîgƒσστ65
Applications Manager

LesGirauds
Posts: 4
Joined: Sun May 06, 2012 7:52 am

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby LesGirauds » Mon May 07, 2012 4:56 am

I had a look at hda-install.log and there was obviously a lot of stuff there! Tbh, I didn't really know what I was looking at, or looking for, but nothing really leapt out as suggesting it was time to man the life boats.

I wanted a headless system so went for the Express CD, thinking it might be easier. I can't check the checksum as I no longer have the iso file, just the disk I burnt from it.

I'm going search forums and play a bit, see what I can do. If all else fails, I'll get the 14 DVD install and start again.

User avatar
ciscoh
Posts: 158
Joined: Thu Mar 10, 2011 1:53 pm

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby ciscoh » Mon May 07, 2012 4:59 am

you can install using the regular method and then make it headless. i believe there is guidance on this somewhere on the wiki...though i cant seem to find it at the moment.

LesGirauds
Posts: 4
Joined: Sun May 06, 2012 7:52 am

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby LesGirauds » Mon May 07, 2012 5:03 am

Yes, the info's there, I'm looking at it!

I had the 5.4 express disk sitting around from my previous attempt at getting it running, so thought I'd give it another go hoping to avoid downloading the latest version! (I don't have a decent internet connection, it'll take the best part of 15 hours to load the DVD installation iso!)/

User avatar
ciscoh
Posts: 158
Joined: Thu Mar 10, 2011 1:53 pm

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby ciscoh » Mon May 07, 2012 5:08 am

Yes, the info's there, I'm looking at it!

I had the 5.4 express disk sitting around from my previous attempt at getting it running, so thought I'd give it another go hoping to avoid downloading the latest version! (I don't have a decent internet connection, it'll take the best part of 15 hours to load the DVD installation iso!)/

i feel for ya........i cant remember life without high speed access.......well i can really but i block those memeories out..:)

CaptInsano
Posts: 2
Joined: Thu May 10, 2012 3:35 am

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby CaptInsano » Thu May 10, 2012 4:54 am

I just started a topic with a similar issue on different hardware, I also have included all the logs I could find!

it is located here http://forums.amahi.org/viewtopic.php?f=9&t=3948

If you fixed this issue could you have a look and advise me?! I have tried everything suggested on the forums I could find.

djamigo
Posts: 1
Joined: Fri May 11, 2012 3:52 am

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby djamigo » Fri May 11, 2012 3:55 am

Hello;

A few weeks ago I also tried installing the Plug Version of AMAHI on a rooted PogoPlug V2, I had the same problem and kept getting a buffer overflow with pluginfactory. I havn`t been able to get it fixed so am waiting to see if any genius can fix this :)).

I`m also hoping that the Raspberry Pi project will reinvigorate the use of ARM machines for running amahi!

DJAMIGO

User avatar
bigfoot65
Project Manager
Posts: 11419
Joined: Mon May 25, 2009 4:31 pm

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby bigfoot65 » Fri May 11, 2012 5:10 am

I am sorry to say, there is a possibility that this may not be resolved. We do not have access to this type of device nor the resources to help.

Your issue is likely device specific. We have been successful with most of the Plug devices, but some of the others has been hit and miss. Your best bet is to post in the Plug Computer topic area in hopes that someone who has been successful can help.

I will tell you that Amahi has not been working on the Plug devices for quite some time and not sure of there future with the project. The interest in these devices appears to have greatly diminished over time. Our current priority is Fedora 17 development. We may get back to them at some point, but hard to say.
ßîgƒσστ65
Applications Manager

User avatar
ciscoh
Posts: 158
Joined: Thu Mar 10, 2011 1:53 pm

Re: Cannot access HDA, ruby not started, cannot load puginfa

Postby ciscoh » Fri May 11, 2012 7:51 am

Our current priority is Fedora 17 development.

so 16 is dead?

i saw that coming....:p

Who is online

Users browsing this forum: No registered users and 4 guests