Adding hard drives
Posted: Mon May 16, 2011 4:42 am
by kmpalmer
Hi, I have got my HDA up and running fine with 1 x additional 2TB drive as per the wiki instructions on adding a second drive. I have also tried to add a third drive of 500GB following the same instructions but It changes my 2TB drive and shows two 500GB drives in the storage list in amahi. I know it is going to be a simple fix / answer but can somebody please help this poor idiot and tell me what I am doing wrong! I would be most grateful for any help.
Cheers.
Re: Adding hard drives
Posted: Sat May 21, 2011 7:32 pm
by sabat
I know this is a short answer, but I figured I would post these 2 links and see if that helps, if you don't find your answer then please reply.
http://wiki.amahi.org/index.php/Adding_ ... o_your_HDA
http://wiki.amahi.org/index.php/Adding_ ... o_your_HDA
Re: Adding hard drives
Posted: Sun Jun 05, 2011 3:16 am
by evylrat
May be completly unrelated, but what make is your 2tb drive? I had an issue recently when my 1.5tb Seagate drive decided it was going to start reporting itself as 500gb, in the BIOS too. Check yours are being reported correctly. Looking on the Seagate site, Seagate released an updated firmware for the drive. Back to 1.5tb.