Auto Load GUI
Auto Load GUI
In Fedora 9 when the computer reboots it stops at the command line and says to enter "I" to load the GUI. Is there a way to load it automatically?
Re: Auto Load GUI
modify /etc/inittab
there must be a line with the following entry:
id:3:initdefault: (the number may vary but is usually 3 - indicating the runlevel, 3 is multi-user with networking
change the number to 5 and it will boot in graphical mode.
there must be a line with the following entry:
id:3:initdefault: (the number may vary but is usually 3 - indicating the runlevel, 3 is multi-user with networking
change the number to 5 and it will boot in graphical mode.
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D2173656C7572206968616D41snlbxq' | dc
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Galileo - HP Proliant ML110 G6 quad core Xeon 2.4GHz, 4GB RAM, 2x750GB RAID1 + 2x1TB RAID1 HDD
Re: Auto Load GUI
Thanks Moredruid. I'll give it a try.
Re: Auto Load GUI
actually, blueracer, how did you get into that predicament??
there seems to be something odd or possibly wrong with that installation.
graphics should definitely come up by default!
the only time fedora asks for "press I" is for interactive startup. there is a little delay at that point.
what happens if you do nothing - don't press i?
maybe that system is slow and you think it's asking you to press i.
there seems to be something odd or possibly wrong with that installation.
graphics should definitely come up by default!
the only time fedora asks for "press I" is for interactive startup. there is a little delay at that point.
what happens if you do nothing - don't press i?
maybe that system is slow and you think it's asking you to press i.
My HDA: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz on MSI board, 8GB RAM, 1TBx2+3TBx1
Re: Auto Load GUI
Thanks for the reply cpg. I just looked at the inittab file and found that its already 5. I was just going to
reply to moredruid when I saw your reply. I tried it out and your right I was not waiting long enough. It works.
reply to moredruid when I saw your reply. I tried it out and your right I was not waiting long enough. It works.
Who is online
Users browsing this forum: No registered users and 58 guests