Why I can't mount my SDA to hda-diskmount?

[theophobus]

Cabling? I assume that your SSD is on a different controller. Try to put it on an other port and try again. I have the same strange behavior in a server where I got 8 HDD's on a raid controller and 4 on the mainboard.

[bigfoot65]

That was gonna be my next guess. Ensure the SSD is attached as SATA 0 or 1 on the mother board. It should be reflected first in the BIOS or it will not reflect correctly in the OS.

[sleife]

bigfoot65 & theophobus you know what.

You are my absolut heros!

I was so stupid, since i plugin my new harddrive i plug out all the other sata and i don't plugin the SSD in S-ATA 0 instead to S-ATA 6 .. and thats logical that the ssd becomes sdf

a (1.)
b (2.)
c (3.)
d (4.)
e (5.)
f (6.)




So, thank you very very much for your help.

The last question at the moment
Can put the landingzone to this path:

example:
/var/hda/files/drives/drive2/Movies

(http://wiki.amahi.org/index.php/Moving_landing_zone)
Very interessining can i put the landingzone into the Storage Pool? So i delete the partition of the 2tb hardrive and it will be 1 Partition. then i put the landing zone to this harddrive (This drive will be in the Storage pool too)

[bigfoot65]

You probably could have the LZ as part of the storage pool, but I would not recommend it. Best to keep it separate in my opinion, especially on its own drive if possible.

[sleife]

I think my Server runs now

Thank you very much for your help. I like the support in amahi, its amazing!

[bigfoot65]

Awesome! Glad to hear all is well now.