raid module

Post Reply
User avatar
marcel
Posts: 160
Joined: Sat May 16, 2009 12:46 am
Location: Netherlands

raid module

Postby marcel » Sun Aug 23, 2009 1:37 pm

I think the Amahi pro version needs raid module. Here a screenshot of Clarkconnect raid web interface.

Image
My HDA cpu: E1400 2Ghz; motherboard: Gigabyte GA-G33M-S2H; memory: Team 2Gb DDR2; 200GB OS HDD, 2x western digital GP 1TB storage HDDs; case: Antec P182
Top
Lincee
Posts: 73
Joined: Sat Jul 04, 2009 3:34 pm
Location: Arnhem, NL
Contact:
Contact Lincee

Re: raid module

Postby Lincee » Mon Aug 24, 2009 8:51 am

such would be nice yes :)
LANTEA: Amahi 7 (vm), HP Proliant Microserver, 8GB RAM, 2x 1TB HDD, 1GB eth
Top
User avatar
marcel
Posts: 160
Joined: Sat May 16, 2009 12:46 am
Location: Netherlands

Re: raid module

Postby marcel » Thu Sep 03, 2009 9:38 am

I experiment a little bit with ClarkConnect. If you want to have working software-raid under ClarkConnect you have to set this up manually during the install of ClarkConnect. So this can also be done with Amahi. Whats important i think there must be a option in the fully automated install where you can set this up. If cpg has some time left :roll: maybe he can make a tab under storage where the software-raid partitions are monitored.
My HDA cpu: E1400 2Ghz; motherboard: Gigabyte GA-G33M-S2H; memory: Team 2Gb DDR2; 200GB OS HDD, 2x western digital GP 1TB storage HDDs; case: Antec P182
Top
Post Reply

Return to “Suggestions”

Who is online

Users browsing this forum: No registered users and 56 guests